X-Git-Url: http://xvm.mit.edu/gitweb/invirt/doc/xvm.git/blobdiff_plain/39f9d3adab03153deee3cd61cfd1104761e2f107..3252d4103c98cf72f4e0e84313316870c81571ad:/xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 1bc3914..b932f2e 100644
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -13,6 +13,25 @@ in the setup screen at F2:
   - Remote Terminal Type: VT100/VT220
   - Redirection After Boot: Disabled
 
+New Supermicros:
+- Advanced -> "Wait for 'F1' If Error" -> Disabled
+- Advanced -> Power Button Function -> 4 Seconds Override
+- Advanced -> PCIe/PnP -> Load Onboard LAN N Option Rom -> Disabled
+- Advanced -> Serial Port -> SOL -> Redirection After BIOS Post -> BootLoader
+- Advanced -> Serial Port -> COM -> Console Redirection -> Enabled
+- Advanced -> Serial Port -> COM -> Redirection After BIOS Post -> BootLoader
+- Advanced -> PCIe -> Disable all OPROMS
+- IPMI -> BMC Network Configuration
+- Boot order: USB Hard Disk, Removable, Hard Disk, UEFI Shell
+
+New debian installer:
+ - 1000M for /boot in raid1 of sda1, sdb1
+ - rest for LVM in raid1 of sda2, sdb2
+  - 100G /
+  - 64G swap
+ - install a vanilla kernel, not xen;
+   will install xen hypervisor from backports in our later custom install
+
 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN
 - IP is (main IP) =~ s/18.181.0/10.5.128/
@@ -54,6 +73,11 @@ Currently allocated backend IPs:
 10.5.128.226 g-d IPMI (currently unplugged)
 10.5.128.227 b-f IPMI
 10.5.128.228 m-a IPMI (not configured)
+18.4.58.231 new c-s IPMI
+18.4.58.232 new a-s IPMI
+18.4.58.233 new s-m IPMI
+18.4.58.234 new a-m IPMI
+
 
 10.6.128.16 c-s
 10.6.128.17 a-s
@@ -67,3 +91,59 @@ Currently allocated backend IPs:
 10.6.128.129 RAID device/management
 
 10.6.128.229 g-d IPMI (temporary hardware)
+
+
+Precise hosts:
+
+Copy /etc/invirt/conf.d/iscsi from another prod host before trying to
+start iscsi (possibly before installing xvm-host)
+
+After installing xen:
+/etc/default/grub (note the commenting out!):
+GRUB_DEFAULT=2
+#GRUB_HIDDEN_TIMEOUT=0
+#GRUB_HIDDEN_TIMEOUT_QUIET=true
+GRUB_TIMEOUT=10
+GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
+GRUB_CMDLINE_LINUX="console=hvc0 earlyprintk=xen nosplash"
+GRUB_CMDLINE_XEN="loglvl=all guest_loglvl=all com2=115200,8n1 console=com2,vga"
+GRUB_DISABLE_OS_PROBER="true"
+
+update-grub
+
+ln -s /usr/share/qemu-linaro /usr/share/qemu
+
+Change /etc/hostname to the host's FQDN
+
+/etc/sysctl.conf (yes, you need all three):
+net.ipv4.conf.eth0.rp_filter = 0
+net.ipv4.conf.eth1.rp_filter = 0
+net.ipv4.conf.all.rp_filter = 0
+
+Comment out in /etc/init.d/clvm:
+# if [ ! -f /etc/cluster/cluster.conf ]; then
+#       log_failure_msg "clvmd: cluster not configured. Aborting."
+#       exit 0
+# fi
+
+# if ! cman_tool status >/dev/null 2>&1; then
+#       log_failure_msg "clvmd: cluster is not running. Aborting."
+#       exit 0
+# fi
+
+
+On boot, you'll need to run /usr/lib/xvm-iscsi-connect to bring up
+iscsi. Multipath will come up automatically along with that.
+
+Make sure corosync is running before starting clvmd (I know, obvious, but still)
+
+On another XVM host, run ipmitool -I lanplus -U ADMIN -H <address of
+new machine's ipmi> shell
+user list
+user set password <ID of ADMIN user>
+Change the password to the XVM root password
+exit
+
+Serial console: from another XVM host run ipmitool -I lanplus -U ADMIN
+-H <address of new machine's ipmi> shell
+sol activate