X-Git-Url: http://xvm.mit.edu/gitweb/invirt/doc/xvm.git/blobdiff_plain/39f9d3adab03153deee3cd61cfd1104761e2f107..c36b9a81c4181269f5d09600969ddd7e31ff2c05:/xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 1bc3914..3ba8a4d 100644
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -13,6 +13,25 @@ in the setup screen at F2:
   - Remote Terminal Type: VT100/VT220
   - Redirection After Boot: Disabled
 
+New Supermicros:
+- Advanced -> "Wait for 'F1' If Error" -> Disabled
+- Advanced -> Power Button Function -> 4 Seconds Override
+- Advanced -> PCIe/PnP -> Load Onboard LAN N Option Rom -> Disabled
+- Advanced -> Serial Port -> SOL -> Redirection After BIOS Post -> BootLoader
+- Advanced -> Serial Port -> COM -> Console Redirection -> Enabled
+- Advanced -> Serial Port -> COM -> Redirection After BIOS Post -> BootLoader
+- Advanced -> PCIe -> Disable all OPROMS
+- IPMI -> BMC Network Configuration
+- Boot order: USB Hard Disk, Removable, Hard Disk, UEFI Shell
+
+New debian installer:
+ - 1000M for /boot in raid1 of sda1, sdb1
+ - rest for LVM in raid1 of sda2, sdb2
+  - 100G /
+  - 64G swap
+ - install a vanilla kernel, not xen;
+   will install xen hypervisor from backports in our later custom install
+
 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN
 - IP is (main IP) =~ s/18.181.0/10.5.128/
@@ -54,6 +73,11 @@ Currently allocated backend IPs:
 10.5.128.226 g-d IPMI (currently unplugged)
 10.5.128.227 b-f IPMI
 10.5.128.228 m-a IPMI (not configured)
+18.4.58.231 new c-s IPMI
+18.4.58.232 new a-s IPMI
+18.4.58.233 new s-m IPMI
+18.4.58.234 new a-m IPMI
+
 
 10.6.128.16 c-s
 10.6.128.17 a-s