X-Git-Url: http://xvm.mit.edu/gitweb/invirt/doc/xvm.git/blobdiff_plain/6f1ca5f00a01f09b946b6b550d2a2e3e2aebcff0..f418ed80a22be3b9106add092b5c03249b85664c:/xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 007c00a..7ea6613 100644
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -77,6 +77,10 @@ Currently allocated backend IPs:
 18.4.58.232 new a-s IPMI
 18.4.58.233 new s-m IPMI
 18.4.58.234 new a-m IPMI
+18.4.58.235 new d-o IPMI
+18.4.58.236 new g-d IPMI
+18.4.58.237 new b-f IPMI
+18.4.58.238 new m-a IPMI
 
 
 10.6.128.16 c-s
@@ -137,10 +141,16 @@ iscsi. Multipath will come up automatically along with that.
 
 Make sure corosync is running before starting clvmd (I know, obvious, but still)
 
+Copy /etc/init/ttyhvc0.conf from another new host
+
 On another XVM host, run ipmitool -I lanplus -U ADMIN -H <address of
-new machine's ipmi> user set password 2
+new machine's ipmi> shell
+user list
+user set password <ID of ADMIN user>
 Change the password to the XVM root password
+exit
 
 Serial console: from another XVM host run ipmitool -I lanplus -U ADMIN
 -H <address of new machine's ipmi> shell
 sol activate
+