X-Git-Url: http://xvm.mit.edu/gitweb/invirt/doc/xvm.git/blobdiff_plain/8be0a810bb11b5e10cc8d617e4283e3003172081..6f1ca5f00a01f09b946b6b550d2a2e3e2aebcff0:/xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 4a078d1..007c00a 100644
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -120,8 +120,27 @@ net.ipv4.conf.eth0.rp_filter = 0
 net.ipv4.conf.eth1.rp_filter = 0
 net.ipv4.conf.all.rp_filter = 0
 
+Comment out in /etc/init.d/clvm:
+# if [ ! -f /etc/cluster/cluster.conf ]; then
+#       log_failure_msg "clvmd: cluster not configured. Aborting."
+#       exit 0
+# fi
+
+# if ! cman_tool status >/dev/null 2>&1; then
+#       log_failure_msg "clvmd: cluster is not running. Aborting."
+#       exit 0
+# fi
+
+
 On boot, you'll need to run /usr/lib/xvm-iscsi-connect to bring up
 iscsi. Multipath will come up automatically along with that.
 
 Make sure corosync is running before starting clvmd (I know, obvious, but still)
 
+On another XVM host, run ipmitool -I lanplus -U ADMIN -H <address of
+new machine's ipmi> user set password 2
+Change the password to the XVM root password
+
+Serial console: from another XVM host run ipmitool -I lanplus -U ADMIN
+-H <address of new machine's ipmi> shell
+sol activate