X-Git-Url: http://xvm.mit.edu/gitweb/invirt/doc/xvm.git/blobdiff_plain/fd14396df7fd804ad2af4921029ef83140f5fe7b..f3ead41062859b5e3ba9c42d884c97565dddc97b:/xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 50829dc..a70d54d 100644
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -6,17 +6,22 @@ in the setup screen at F2:
 - CPU -> Virtualization Technology: on
 - Boot Sequence: disable NIC
 - Integrated Devices -> Embedded Gb NIC: turn off PXE
+- Serial Communication:
+  - Serial Communication: On with Console Redirection via COM2
+  - External Serial Connector: COM1
+  - Failsafe Baud Rate: 57600
+  - Remote Terminal Type: VT100/VT220
+  - Redirection After Boot: Disabled
 
 in the setup screen for remote management, at Ctrl-E:
+- Turn on IPMI over LAN
 - IP is (main IP) =~ s/18.181.0/10.5.128/
   e.g. 10.5.128.221 for citadel-station == 18.181.0.221
 - netmask is 255.255.0.0
+- Set the password to the XVM root
 
-These settings are reflected in the basic screen of xvm-host-2 and the
-remote-management screen of xvm-host-1.  At time of writing, the basic
-settings on xvm-host-1 may differ, and the remote-management settings
-on xvm-host-2 are disabled.  xvm-host-3 has IPMI-over-LAN enabled in
-the Ctrl-E screen.  xvm-host-4 remains unconfigured.
+All of these settings are reflected on all 4 servers in the production
+cluster.
 
 
 In the debian installer: