+++ /dev/null
-# -----------------------------
-# PostgreSQL configuration file
-# -----------------------------
-#
-# This file consists of lines of the form:
-#
-# name = value
-#
-# (The '=' is optional.) White space may be used. Comments are introduced
-# with '#' anywhere on a line. The complete list of option names and
-# allowed values can be found in the PostgreSQL documentation. The
-# commented-out settings shown in this file represent the default values.
-#
-# Please note that re-commenting a setting is NOT sufficient to revert it
-# to the default value, unless you restart the postmaster.
-#
-# Any option can also be given as a command line switch to the
-# postmaster, e.g. 'postmaster -c log_connections=on'. Some options
-# can be changed at run-time with the 'SET' SQL command.
-#
-# This file is read on postmaster startup and when the postmaster
-# receives a SIGHUP. If you edit the file on a running system, you have
-# to SIGHUP the postmaster for the changes to take effect, or use
-# "pg_ctl reload". Some settings, such as listen_addresses, require
-# a postmaster shutdown and restart to take effect.
-
-
-#---------------------------------------------------------------------------
-# FILE LOCATIONS
-#---------------------------------------------------------------------------
-
-# The default values of these variables are driven from the -D command line
-# switch or PGDATA environment variable, represented here as ConfigDir.
-
-#data_directory = 'ConfigDir' # use data in another directory
-hba_file = '/etc/postgresql/8.1/main/pg_hba.conf' # host-based authentication file
-ident_file = '/etc/postgresql/8.1/main/pg_ident.conf' # IDENT configuration file
-
-# If external_pid_file is not explicitly set, no extra pid file is written.
-external_pid_file = '/var/run/postgresql/8.1-main.pid' # write an extra pid file
-
-
-#---------------------------------------------------------------------------
-# CONNECTIONS AND AUTHENTICATION
-#---------------------------------------------------------------------------
-
-# - Connection Settings -
-
-listen_addresses = '*' # what IP address(es) to listen on;
- # comma-separated list of addresses;
- # defaults to 'localhost', '*' = all
-port = 5432
-max_connections = 100
-# note: increasing max_connections costs ~400 bytes of shared memory per
-# connection slot, plus lock space (see max_locks_per_transaction). You
-# might also need to raise shared_buffers to support more connections.
-#superuser_reserved_connections = 2
-unix_socket_directory = '/var/run/postgresql'
-#unix_socket_group = ''
-#unix_socket_permissions = 0777 # octal
-#bonjour_name = '' # defaults to the computer name
-
-# - Security & Authentication -
-
-#authentication_timeout = 60 # 1-600, in seconds
-ssl = true
-#password_encryption = on
-#db_user_namespace = off
-
-# Kerberos
-#krb_server_keyfile = ''
-#krb_srvname = 'postgres'
-#krb_server_hostname = '' # empty string matches any keytab entry
-#krb_caseins_users = off
-
-# - TCP Keepalives -
-# see 'man 7 tcp' for details
-
-#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
- # 0 selects the system default
-#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
- # 0 selects the system default
-#tcp_keepalives_count = 0 # TCP_KEEPCNT;
- # 0 selects the system default
-
-
-#---------------------------------------------------------------------------
-# RESOURCE USAGE (except WAL)
-#---------------------------------------------------------------------------
-
-# - Memory -
-
-shared_buffers = 1000 # min 16 or max_connections*2, 8KB each
-#temp_buffers = 1000 # min 100, 8KB each
-#max_prepared_transactions = 5 # can be 0 or more
-# note: increasing max_prepared_transactions costs ~600 bytes of shared memory
-# per transaction slot, plus lock space (see max_locks_per_transaction).
-#work_mem = 1024 # min 64, size in KB
-#maintenance_work_mem = 16384 # min 1024, size in KB
-#max_stack_depth = 2048 # min 100, size in KB
-
-# - Free Space Map -
-
-#max_fsm_pages = 20000 # min max_fsm_relations*16, 6 bytes each
-#max_fsm_relations = 1000 # min 100, ~70 bytes each
-
-# - Kernel Resource Usage -
-
-#max_files_per_process = 1000 # min 25
-#preload_libraries = ''
-
-# - Cost-Based Vacuum Delay -
-
-#vacuum_cost_delay = 0 # 0-1000 milliseconds
-#vacuum_cost_page_hit = 1 # 0-10000 credits
-#vacuum_cost_page_miss = 10 # 0-10000 credits
-#vacuum_cost_page_dirty = 20 # 0-10000 credits
-#vacuum_cost_limit = 200 # 0-10000 credits
-
-# - Background writer -
-
-#bgwriter_delay = 200 # 10-10000 milliseconds between rounds
-#bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round
-#bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round
-#bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round
-#bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round
-
-
-#---------------------------------------------------------------------------
-# WRITE AHEAD LOG
-#---------------------------------------------------------------------------
-
-# - Settings -
-
-#fsync = on # turns forced synchronization on or off
-#wal_sync_method = fsync # the default is the first option
- # supported by the operating system:
- # open_datasync
- # fdatasync
- # fsync
- # fsync_writethrough
- # open_sync
-#full_page_writes = on # recover from partial page writes
-#wal_buffers = 8 # min 4, 8KB each
-#commit_delay = 0 # range 0-100000, in microseconds
-#commit_siblings = 5 # range 1-1000
-
-# - Checkpoints -
-
-#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
-#checkpoint_timeout = 300 # range 30-3600, in seconds
-#checkpoint_warning = 30 # in seconds, 0 is off
-
-# - Archiving -
-
-#archive_command = '' # command to use to archive a logfile
- # segment
-
-
-#---------------------------------------------------------------------------
-# QUERY TUNING
-#---------------------------------------------------------------------------
-
-# - Planner Method Configuration -
-
-#enable_bitmapscan = on
-#enable_hashagg = on
-#enable_hashjoin = on
-#enable_indexscan = on
-#enable_mergejoin = on
-#enable_nestloop = on
-#enable_seqscan = on
-#enable_sort = on
-#enable_tidscan = on
-
-# - Planner Cost Constants -
-
-#effective_cache_size = 1000 # typically 8KB each
-#random_page_cost = 4 # units are one sequential page fetch
- # cost
-#cpu_tuple_cost = 0.01 # (same)
-#cpu_index_tuple_cost = 0.001 # (same)
-#cpu_operator_cost = 0.0025 # (same)
-
-# - Genetic Query Optimizer -
-
-#geqo = on
-#geqo_threshold = 12
-#geqo_effort = 5 # range 1-10
-#geqo_pool_size = 0 # selects default based on effort
-#geqo_generations = 0 # selects default based on effort
-#geqo_selection_bias = 2.0 # range 1.5-2.0
-
-# - Other Planner Options -
-
-#default_statistics_target = 10 # range 1-1000
-#constraint_exclusion = off
-#from_collapse_limit = 8
-#join_collapse_limit = 8 # 1 disables collapsing of explicit
- # JOINs
-
-
-#---------------------------------------------------------------------------
-# ERROR REPORTING AND LOGGING
-#---------------------------------------------------------------------------
-
-# - Where to Log -
-
-#log_destination = 'stderr' # Valid values are combinations of
- # stderr, syslog and eventlog,
- # depending on platform.
-
-# This is used when logging to stderr:
-#redirect_stderr = off # Enable capturing of stderr into log
- # files
-
-# These are only used if redirect_stderr is on:
-#log_directory = 'pg_log' # Directory where log files are written
- # Can be absolute or relative to PGDATA
-#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log file name pattern.
- # Can include strftime() escapes
-#log_truncate_on_rotation = off # If on, any existing log file of the same
- # name as the new log file will be
- # truncated rather than appended to. But
- # such truncation only occurs on
- # time-driven rotation, not on restarts
- # or size-driven rotation. Default is
- # off, meaning append to existing files
- # in all cases.
-#log_rotation_age = 1440 # Automatic rotation of logfiles will
- # happen after so many minutes. 0 to
- # disable.
-#log_rotation_size = 10240 # Automatic rotation of logfiles will
- # happen after so many kilobytes of log
- # output. 0 to disable.
-
-# These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
-#syslog_ident = 'postgres'
-
-
-# - When to Log -
-
-#client_min_messages = notice # Values, in order of decreasing detail:
- # debug5
- # debug4
- # debug3
- # debug2
- # debug1
- # log
- # notice
- # warning
- # error
-
-#log_min_messages = notice # Values, in order of decreasing detail:
- # debug5
- # debug4
- # debug3
- # debug2
- # debug1
- # info
- # notice
- # warning
- # error
- # log
- # fatal
- # panic
-
-#log_error_verbosity = default # terse, default, or verbose messages
-
-#log_min_error_statement = panic # Values in order of increasing severity:
- # debug5
- # debug4
- # debug3
- # debug2
- # debug1
- # info
- # notice
- # warning
- # error
- # panic(off)
-
-#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
- # and their durations, in milliseconds.
-
-#silent_mode = off # DO NOT USE without syslog or
- # redirect_stderr
-
-# - What to Log -
-
-#debug_print_parse = off
-#debug_print_rewritten = off
-#debug_print_plan = off
-#debug_pretty_print = off
-#log_connections = off
-#log_disconnections = off
-#log_duration = off
-log_line_prefix = '%t ' # Special values:
- # %u = user name
- # %d = database name
- # %r = remote host and port
- # %h = remote host
- # %p = PID
- # %t = timestamp (no milliseconds)
- # %m = timestamp with milliseconds
- # %i = command tag
- # %c = session id
- # %l = session line number
- # %s = session start timestamp
- # %x = transaction id
- # %q = stop here in non-session
- # processes
- # %% = '%'
- # e.g. '<%u%%%d> '
-#log_statement = 'none' # none, mod, ddl, all
-#log_hostname = off
-
-
-#---------------------------------------------------------------------------
-# RUNTIME STATISTICS
-#---------------------------------------------------------------------------
-
-# - Statistics Monitoring -
-
-#log_parser_stats = off
-#log_planner_stats = off
-#log_executor_stats = off
-#log_statement_stats = off
-
-# - Query/Index Statistics Collector -
-
-#stats_start_collector = on
-#stats_command_string = off
-#stats_block_level = off
-stats_row_level = on
-#stats_reset_on_server_start = off
-
-
-#---------------------------------------------------------------------------
-# AUTOVACUUM PARAMETERS
-#---------------------------------------------------------------------------
-
-autovacuum = on # enable autovacuum subprocess?
-#autovacuum_naptime = 60 # time between autovacuum runs, in secs
-#autovacuum_vacuum_threshold = 1000 # min # of tuple updates before
- # vacuum
-#autovacuum_analyze_threshold = 500 # min # of tuple updates before
- # analyze
-#autovacuum_vacuum_scale_factor = 0.4 # fraction of rel size before
- # vacuum
-#autovacuum_analyze_scale_factor = 0.2 # fraction of rel size before
- # analyze
-#autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for
- # autovac, -1 means use
- # vacuum_cost_delay
-#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
- # autovac, -1 means use
- # vacuum_cost_limit
-
-
-#---------------------------------------------------------------------------
-# CLIENT CONNECTION DEFAULTS
-#---------------------------------------------------------------------------
-
-# - Statement Behavior -
-
-#search_path = '$user,public' # schema names
-#default_tablespace = '' # a tablespace name, '' uses
- # the default
-#check_function_bodies = on
-#default_transaction_isolation = 'read committed'
-#default_transaction_read_only = off
-#statement_timeout = 0 # 0 is disabled, in milliseconds
-
-# - Locale and Formatting -
-
-#datestyle = 'iso, mdy'
-#timezone = unknown # actually, defaults to TZ
- # environment setting
-#australian_timezones = off
-#extra_float_digits = 0 # min -15, max 2
-#client_encoding = sql_ascii # actually, defaults to database
- # encoding
-
-# These settings are initialized by initdb -- they might be changed
-lc_messages = 'C' # locale for system error message
- # strings
-lc_monetary = 'C' # locale for monetary formatting
-lc_numeric = 'C' # locale for number formatting
-lc_time = 'C' # locale for time formatting
-
-# - Other Defaults -
-
-#explain_pretty_print = on
-#dynamic_library_path = '$libdir'
-
-
-#---------------------------------------------------------------------------
-# LOCK MANAGEMENT
-#---------------------------------------------------------------------------
-
-#deadlock_timeout = 1000 # in milliseconds
-#max_locks_per_transaction = 64 # min 10
-# note: each lock table slot uses ~220 bytes of shared memory, and there are
-# max_locks_per_transaction * (max_connections + max_prepared_transactions)
-# lock table slots.
-
-
-#---------------------------------------------------------------------------
-# VERSION/PLATFORM COMPATIBILITY
-#---------------------------------------------------------------------------
-
-# - Previous Postgres Versions -
-
-#add_missing_from = off
-#backslash_quote = safe_encoding # on, off, or safe_encoding
-#default_with_oids = off
-#escape_string_warning = off
-#regex_flavor = advanced # advanced, extended, or basic
-#sql_inheritance = on
-
-# - Other Platforms & Clients -
-
-#transform_null_equals = off
-
-
-#---------------------------------------------------------------------------
-# CUSTOMIZED OPTIONS
-#---------------------------------------------------------------------------
-
-#custom_variable_classes = '' # list of custom variable class names
projects / invirt/packages/invirt-database.git / blobdiff