+invirt-xen-config (0.0.57) unstable; urgency=low
+
+ * invirt-database: Fix the autoinstall logic so that if we've
+ increased the memory temporarily for the autoinstall above
+ the machine's database setting, we also bring maxmem up to
+ the same level. Otherwise the machine doesn't turn on
+ because it's requesting to start with more memory than maxmem,
+ and this failure mode is silent to the user.
+
+ -- Mitchell Berger <mitchb@mit.edu> Sat, 02 Feb 2019 16:52:00 -0500
+
+invirt-xen-config (0.0.56) unstable; urgency=low
+
+ * vif-invirtroute: Kill arpspoof with SIGKILL when we're done. The
+ version in this distro (which is the latest beta from the
+ unmaintained upstream) tries to "clean up" when you normally
+ terminate it. This involves trying to perform an ARP lookup
+ without interfering to see what the MAC should've been and then
+ sending replies for that. This appears to cause a race depending
+ on whether the entry for the machine's old domain (if it's being
+ rebooted) is listed as <incomplete> in the ARP table or is totally
+ flushed. If you lose the race, it sends further gratuitous ARPs
+ telling the router that your MAC is all-zeros because of a bug
+ where it fails to check for an incomplete ARP entry. This is
+ believed to cause the bug that has plagued XVM for years where
+ you sometimes lose off-network connectivity on reboot.
+
+ -- Mitchell Berger <mitchb@mit.edu> Mon, 25 Jun 2018 22:04:00 -0400
+
+invirt-xen-config (0.0.55) unstable; urgency=low
+
+ * invirt-database: bump up autoinstall memory to make modern releases
+ work again.
+
+ -- Mitchell Berger <mitchb@mit.edu> Fri, 01 Jun 2018 02:17:00 -0400
+
+invirt-xen-config (0.0.54) unstable; urgency=low
+
+ * invirt-database: handle several possible actions to take with an
+ "other" set of network parameters. Renumber a machine by swapping
+ the sets of netparams, DNAT from an old address by passing through
+ additional parameters to vif-invirtroute, and teardown an IP
+ transition by clearing all the "other" values. Also, use the
+ netmask and gateway for the VM when autoinstalling, rather than
+ parameters from the global cluster configuration.
+ * vif-invirtroute: if there is an "other" IP address, DNAT it to the
+ primary IP, set up routing to get it to the VM, and arp for it.
+ Also, cut out the nonsense with backgrounding arpspoof, sleeping, and
+ killing it; we have the technology for 'timeout'. Finally, don't
+ pass a "src" argument to "ip route del" to ensure a match even if
+ the host's "main IP" has changed and caused the route to be inserted
+ with a different src.
+ * templatize-xend-config: explicitly turn on the relocation server
+ * qemu-ifup.invirt: make HVMs work and not only if your eth0 just happens
+ to have an IPv4 network address sitting on it
+
+ -- Mitchell Berger <mitchb@mit.edu> Sun, 27 May 2018 01:45:00 -0400
+
+invirt-xen-config (0.0.53) unstable; urgency=low
+
+ * Fix machine UUID assignment after SQLAlchemy started returning Unicode
+ objects.
+
+ -- Quentin Smith <quentin@mit.edu> Mon, 06 Jan 2014 22:02:11 -0500
+
+invirt-xen-config (0.0.52) UNRELEASED; urgency=low
+
+ * Fix PVHVM networking
+
+ -- Adam Glasgall <glasgall@mit.edu> Mon, 02 Sep 2013 21:16:01 -0400
+
+invirt-xen-config (0.0.51) unstable; urgency=low
+
+ * Fixed code for NIC model options.
+
+ -- Steven Valdez <dvorak42@mit.edu> Wed, 31 Jul 2013 22:28:39 -0400
+
+invirt-xen-config (0.0.50) unstable; urgency=low
+
+ * Adding NIC model option to DB.
+
+ -- Steven Valdez <dvorak42@mit.edu> Fri, 26 Jul 2013 22:28:47 -0400
+
+invirt-xen-config (0.0.49) precise; urgency=low
+
+ * Change HVM emulated network card to pcnet, because the emulated
+ realtek hardware is as bad as the real realtek hardware.
+
+ -- Adam Glasgall <glasgall@mit.edu> Tue, 23 Jul 2013 02:52:06 -0400
+
+invirt-xen-config (0.0.48) precise; urgency=low
+
+ * Disable PVHVM for now until we figure out the best way to do it
+
+ -- Adam Glasgall <glasgall@mit.edu> Mon, 22 Jul 2013 01:08:40 -0400
+
+invirt-xen-config (0.0.47) unstable; urgency=low
+
+ * Blame glasgall for the wasted version number.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 14:55:00 -0400
+
+invirt-xen-config (0.0.46) unstable; urgency=low
+
+ * Non-hotplug events apparently also use vif-setup.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 14:49:54 -0400
+
+invirt-xen-config (0.0.45) unstable; urgency=low
+
+ * Neuter vif-setup (from xl, perhaps?)
+ * Update vif-invirtroute for Xen 4's scripts.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 14:28:58 -0400
+
+invirt-xen-config (0.0.44) unstable; urgency=low
+
+ * Disable populate-on-demand for HVMs.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 13:14:53 -0400
+
+invirt-xen-config (0.0.43+nmu1) precise; urgency=low
+
+ * Use config-package-dev.
+
+ -- Alexander Chernyakhovsky <achernya@mit.edu> Sun, 21 Jul 2013 12:48:47 -0400
+
+invirt-xen-config (0.0.43) precise; urgency=low
+
+ * fix the diversion too.
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 21 Jul 2013 01:14:41 -0400
+
+invirt-xen-config (0.0.42) precise; urgency=low
+
+ * qemu-ifup moved from /etc/xen to /etc/xen/scripts
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 21 Jul 2013 01:06:27 -0400
+
+invirt-xen-config (0.0.41) precise; urgency=low
+
+ * no-change rebuild
+
+ -- Adam Glasgall <glasgall@mit.edu> Sat, 20 Jul 2013 16:54:56 -0400
+
invirt-xen-config (0.0.40) precise; urgency=low
* Updating version for precise.
projects / invirt/packages/invirt-xen-config.git / blobdiff