+invirt-xen-config (0.0.49) precise; urgency=low
+
+ * Change HVM emulated network card to pcnet, because the emulated
+ realtek hardware is as bad as the real realtek hardware.
+
+ -- Adam Glasgall <glasgall@mit.edu> Tue, 23 Jul 2013 02:52:06 -0400
+
+invirt-xen-config (0.0.48) precise; urgency=low
+
+ * Disable PVHVM for now until we figure out the best way to do it
+
+ -- Adam Glasgall <glasgall@mit.edu> Mon, 22 Jul 2013 01:08:40 -0400
+
+invirt-xen-config (0.0.47) unstable; urgency=low
+
+ * Blame glasgall for the wasted version number.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 14:55:00 -0400
+
+invirt-xen-config (0.0.46) unstable; urgency=low
+
+ * Non-hotplug events apparently also use vif-setup.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 14:49:54 -0400
+
+invirt-xen-config (0.0.45) unstable; urgency=low
+
+ * Neuter vif-setup (from xl, perhaps?)
+ * Update vif-invirtroute for Xen 4's scripts.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 14:28:58 -0400
+
+invirt-xen-config (0.0.44) unstable; urgency=low
+
+ * Disable populate-on-demand for HVMs.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 21 Jul 2013 13:14:53 -0400
+
+invirt-xen-config (0.0.43+nmu1) precise; urgency=low
+
+ * Use config-package-dev.
+
+ -- Alexander Chernyakhovsky <achernya@mit.edu> Sun, 21 Jul 2013 12:48:47 -0400
+
+invirt-xen-config (0.0.43) precise; urgency=low
+
+ * fix the diversion too.
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 21 Jul 2013 01:14:41 -0400
+
+invirt-xen-config (0.0.42) precise; urgency=low
+
+ * qemu-ifup moved from /etc/xen to /etc/xen/scripts
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 21 Jul 2013 01:06:27 -0400
+
+invirt-xen-config (0.0.41) precise; urgency=low
+
+ * no-change rebuild
+
+ -- Adam Glasgall <glasgall@mit.edu> Sat, 20 Jul 2013 16:54:56 -0400
+
+invirt-xen-config (0.0.40) precise; urgency=low
+
+ * Updating version for precise.
+
+ -- Steven Valdez <dvorak42@mit.edu> Sat, 20 Jul 2013 16:46:47 -0400
+
+invirt-xen-config (0.0.39) unstable; urgency=low
+
+ * Treat config.hosts.internal_ips as an array
+
+ -- Peter Iannucci <iannucci@mit.edu> Mon, 01 Jul 2013 21:51:00 -0400
+
+invirt-xen-config (0.0.38~glasgall15) precise; urgency=low
+
+ * Teach qemu-dm-invirt that /usr/lib/xen moved to /usr/lib/xen-4.1
+
+ -- Adam Glasgall <glasgall@mit.edu> Thu, 06 Jun 2013 21:36:37 -0400
+
+invirt-xen-config (0.0.38~glasgall14achernya1) precise; urgency=low
+
+ * Switch to dh7
+ * Bump standards version
+
+ -- Alexander Chernyakhovsky <achernya@mit.edu> Fri, 31 May 2013 21:16:20 -0400
+
+invirt-xen-config (0.0.38~glasgall14) precise; urgency=low
+
+ * /usr/lib/xen moved to /usr/lib/xen-4.1. teach invirt-database this.
+
+ -- Adam Glasgall <glasgall@mit.edu> Wed, 08 May 2013 00:06:25 -0400
+
+invirt-xen-config (0.0.38~glasgall13) precise; urgency=low
+
+ * Undo enabling network-bridge; we want to manage our own bridge config
+ now. Oh, irony.
+
+ -- Adam Glasgall <glasgall@mit.edu> Mon, 06 May 2013 19:14:41 -0400
+
+invirt-xen-config (0.0.38~glasgall12) precise; urgency=low
+
+ * xm was expecting a string and was getting a unistring for machine
+ name, which resulted in the VM name always being
+ 'invirt-database'. Use passed-in machine_name instead, since that will
+ be a string. IBTSOCS.
+
+ -- Adam Glasgall <glasgall@mit.edu> Mon, 06 May 2013 19:14:23 -0400
+
+invirt-xen-config (0.0.38~glasgall11) precise; urgency=low
+
+ * Add dependency on ethtool.
+
+ -- Adam Glasgall <glasgall@mit.edu> Fri, 26 Apr 2013 22:36:10 -0400
+
+invirt-xen-config (0.0.38~glasgall10) precise; urgency=low
+
+ * SQLAlchemy API updates in invirt-database xen config
+
+ -- Adam Glasgall <glasgall@mit.edu> Fri, 26 Apr 2013 21:14:25 -0400
+
+invirt-xen-config (0.0.38~glasgall9) precise; urgency=low
+
+ * _really_ correct regexp this time.
+
+ -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 17:57:11 -0400
+
+invirt-xen-config (0.0.38~glasgall8) precise; urgency=low
+
+ * fix typo in regexp
+
+ -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 17:49:08 -0400
+
+invirt-xen-config (0.0.38~glasgall7) precise; urgency=low
+
+ * Correct regexp in s/// over xend-config.sxp
+
+ -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 17:46:43 -0400
+
+invirt-xen-config (0.0.38~glasgall6) precise; urgency=low
+
+ * Enable network-bridge in xend-config.sxp, since Precise doesn't by
+ default anymore.
+
+ -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 17:40:33 -0400
+
+invirt-xen-config (0.0.38~glasgall5) precise; urgency=low
+
+ * s/// out the "${XEN_CONFIG_DIR}" reference that was making mako choke
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 24 Mar 2013 20:31:31 -0400
+
+invirt-xen-config (0.0.38~glasgall4) precise; urgency=low
+
+ * Oops, no, we don't actually want to uninstall grub. Depend on grub-pc
+ instead.
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 24 Mar 2013 17:49:24 -0400
+
+invirt-xen-config (0.0.38~glasgall3) precise; urgency=low
+
+ * ubuntu-xen-server bit the dust several releases ago. replace it by
+ explicitly listing the xen bits we need in Depends.
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 24 Mar 2013 17:44:24 -0400
+
+invirt-xen-config (0.0.38~glasgall2) precise; urgency=low
+
+ * Bump xen-utils dependency
+ * Update xend-config.sxp transformer for newer default config
+
+ -- Adam Glasgall <glasgall@mit.edu> Sun, 24 Mar 2013 17:37:05 -0400
+
+invirt-xen-config (0.0.38~glasgall1) precise; urgency=low
+
+ * Bump version for precise
+
+ -- Adam Glasgall <glasgall@mit.edu> Thu, 21 Mar 2013 23:24:57 -0700
+
+invirt-xen-config (0.0.37) unstable; urgency=low
+
+ * Support multiple NICs on HVMs.
+
+ -- Mitchell Berger <mitchb@mit.edu> Sat, 29 Oct 2011 21:53:00 -0400
+
+invirt-xen-config (0.0.36) unstable; urgency=low
+
+ * Version bump to recover from invirtibuilder version error. No changes.
+
+ -- Joshua Oreman <oremanj@mit.edu> Tue, 26 Apr 2011 16:30:22 -0400
+
+invirt-xen-config (0.0.33) unstable; urgency=low
+
+ * Explicitly disable proxy_arp on the "all" interface; it seems to be
+ enabled on bootup if we don't.
+
+ -- Joshua Oreman <oremanj@mit.edu> Tue, 26 Apr 2011 16:12:52 -0400
+
+invirt-xen-config (0.0.32) unstable; urgency=low
+
+ * Don't enable proxy arp on every interface, just the public one (fixes
+ problems with reachability on the backend network!)
+
+ -- Quentin Smith <quentin@mit.edu> Wed, 09 Mar 2011 18:18:06 -0500
+
+invirt-xen-config (0.0.31) unstable; urgency=low
+
+ * Only run arpspoof when NICs are brought online (this potentially fixes
+ a race condition that occurs when migrating VMs)
+ * Remove the advertised gso-tcpv4 feature from VIFs which causes the
+ guest to incorrectly believe that Xen supports TCP segmentation
+ offload. This supercedes our previous fix of disabling TSO in guest
+ kernels.
+
+ -- Quentin Smith <quentin@mit.edu> Mon, 27 Dec 2010 01:19:58 -0500
+
+invirt-xen-config (0.0.30) unstable; urgency=low
+
+ * Support debian-installer based autoinstallation.
+
+ -- Quentin Smith <quentin@mit.edu> Sun, 26 Dec 2010 17:10:54 -0500
+
+invirt-xen-config (0.0.29) unstable; urgency=low
+
+ * Merged in r2821,2824,2827 from hvirt branch.
+
+ -- Greg Brockman <gdb@mit.edu> Sun, 31 Jan 2010 18:44:53 -0500
+
+invirt-xen-config (0.0.28) unstable; urgency=low
+
+ * Restarting xend is just a *really bad* idae.
+
+ -- Evan Broder <broder@mit.edu> Tue, 26 Jan 2010 23:32:47 -0500
+
+invirt-xen-config (0.0.27) unstable; urgency=low
+
+ [ Greg Brockman ]
+ * Nuked the pinning of libxen3
+ * Changed xen.network -> xen
+
+ [ Evan Broder ]
+ * Don't try to start sysvms in the invirt-xen-config init script. The
+ code has never been reliable.
+ * Don't create iptables rules in vif-invirtroute - they don't do anything.
+ * For simplicity, and because we've never used it, tear the IPv6
+ "support" out of vif-invirtroute.
+
+ [ Quentin Smith ]
+ * Increase dom0's weight to improve IO performance.
+
+ -- Greg Brockman <gdb@mit.edu> Sun, 17 Jan 2010 23:32:03 -0500
+
+invirt-xen-config (0.0.26) unstable; urgency=low
+
+ * Kill the moocow password for the VNC server. Not setting this variable
+ causes VNC clients to not prompt for a password instead.
+
+ -- Evan Broder <broder@mit.edu> Mon, 28 Sep 2009 21:20:21 -0400
+
+invirt-xen-config (0.0.25) unstable; urgency=low
+
+ * Some of the autoinstallers want a lot of RAM. Give it to them.
+
+ -- Evan Broder <broder@mit.edu> Sun, 26 Jul 2009 20:35:13 -0700
+
+invirt-xen-config (0.0.24) unstable; urgency=low
+
+ * Prepare for a Xen 3.3 world by allowing either 3.2 or 3.3 packages.
+
+ -- Evan Broder <broder@mit.edu> Fri, 20 Feb 2009 17:36:23 -0500
+
+invirt-xen-config (0.0.23) unstable; urgency=low
+
+ * revert 0.0.22
+ * use run-parts --list to get a tighter set of sysvm config files
+
+ -- Greg Price <price@mit.edu> Tue, 03 Feb 2009 00:20:03 -0500
+
+invirt-xen-config (0.0.22) unstable; urgency=low
+
+ * Correctly calculate both the list of sysvms to boot and the list of
+ Mako templates to render in the init script.
+
+ -- Evan Broder <broder@mit.edu> Mon, 02 Feb 2009 17:30:51 -0500
+
+invirt-xen-config (0.0.21) unstable; urgency=low
+
+ * Move sysvms/* into xvm-prodconfig from invirt-xen-config
+ * genericize sysvm startup to glob /etc/xen/sysvms/s_*
+ * eth2 -> config.xen.network.iface
+
+ -- Greg Price <price@mit.edu> Sat, 31 Jan 2009 18:40:20 -0500
+
+invirt-xen-config (0.0.20) unstable; urgency=low
+
+ * Add Provides and Conflicts lines to debian/control for
+ config-package-dev
+
+ -- Evan Broder <broder@mit.edu> Sat, 24 Jan 2009 20:16:06 -0500
+
+invirt-xen-config (0.0.19) unstable; urgency=low
+
+ * prune tempfile, subprocess imports from invirt-database
+ (subprocess! wow, that was a hack. that was also over a year ago, r223.)
+
+ -- Greg Price <price@mit.edu> Tue, 09 Dec 2008 00:25:56 -0500
+
+invirt-xen-config (0.0.18) unstable; urgency=low
+
+ * Explicitly grab the short form of the hostname to assemble the backend
+ hostname
+
+ -- Evan Broder <broder@mit.edu> Wed, 26 Nov 2008 01:27:07 -0500
+
+invirt-xen-config (0.0.17) unstable; urgency=low
+
+ * Pin libxen3 to the hardy repository so it doesn't get pulled from
+ hardy-backports until we're ready to upgrade to Xen 3.3
+
+ -- Evan Broder <broder@mit.edu> Sat, 22 Nov 2008 19:19:07 -0500
+
+invirt-xen-config (0.0.16) unstable; urgency=low
+
+ * Pick the kernel and initrd for the autoinstaller based on the kernel
+ the dom0 is currently running
+
+ -- Evan Broder <broder@mit.edu> Sat, 15 Nov 2008 23:45:30 -0500
+
+invirt-xen-config (0.0.15) unstable; urgency=low
+
+ * Set the max memory to a really high number so we can bump it for users
+ * Pass the correct networking device to vif-invirtroute
+
+ -- Evan Broder <broder@mit.edu> Fri, 14 Nov 2008 00:03:47 -0500
+
+invirt-xen-config (0.0.14) unstable; urgency=low
+
+ * Throw away any output from LVM commands while starting sysvms
+ * Correctly delete the lock LVs
+
+ -- Evan Broder <broder@mit.edu> Mon, 10 Nov 2008 03:57:09 -0500
+
+invirt-xen-config (0.0.13) unstable; urgency=low
+
+ * Use a lock LV when attempting to start sysvms since exclusive LV
+ activation has useless semantics
+
+ -- Evan Broder <broder@mit.edu> Mon, 10 Nov 2008 03:15:31 -0500
+
+invirt-xen-config (0.0.12) unstable; urgency=low
+
+ * Add missing close paren to init script
+
+ -- Evan Broder <broder@mit.edu> Fri, 31 Oct 2008 09:50:47 -0400
+
+invirt-xen-config (0.0.11) unstable; urgency=low
+
+ * Automatically startup sysvms if they're not running already
+
+ -- Evan Broder <broder@mit.edu> Fri, 31 Oct 2008 09:47:15 -0400
+
+invirt-xen-config (0.0.10) unstable; urgency=low
+
+ * Generate config files for sysvms
+
+ -- Evan Broder <broder@mit.edu> Fri, 31 Oct 2008 07:40:13 -0400
+
invirt-xen-config (0.0.9) unstable; urgency=low
* don't try to disable tx checksums for HVMs; it errors out
projects / invirt/packages/invirt-xen-config.git / blobdiff