X-Git-Url: http://xvm.mit.edu/gitweb/invirt/packages/invirt-xen-config.git/blobdiff_plain/1efeb4b34488b6ef590331b49e94da8a935ea130..57a29a823f478cf8ad7d86d3749093d702c25224:/files/etc/xen/scripts/vif-invirtroute

diff --git a/files/etc/xen/scripts/vif-invirtroute b/files/etc/xen/scripts/vif-invirtroute
new file mode 100755
index 0000000..e5b96bd
--- /dev/null
+++ b/files/etc/xen/scripts/vif-invirtroute
@@ -0,0 +1,88 @@
+#!/bin/bash
+
+
+
+
+
+#============================================================================
+# /etc/xen/vif-route
+#
+# Script for configuring a vif in routed mode.
+# The hotplugging system will call this script if it is specified either in
+# the device configuration given to Xend, or the default Xend configuration
+# in /etc/xen/xend-config.sxp.  If the script is specified in neither of those
+# places, then vif-bridge is the default.
+#
+# Usage:
+# vif-route (add|remove|online|offline)
+#
+# Environment vars:
+# vif         vif interface name (required).
+# XENBUS_PATH path to this device's details in the XenStore (required).
+# Read from the store:
+# ip      list of IP networks for the vif, space-separated (default given in
+#         this script).
+# V6PREFIX  prefix of v6 address to use
+# Note that the v6 support is kind of broken because there's not really a way to populate the v6 prefix
+# This script will set up proxy arp  for any ip addresses that are being routed
+# type read to determine if the device is ioemu
+
+#============================================================================
+
+dir=$(dirname "$0")
+. "$dir/vif-common.sh"
+
+main_ip=$(dom0_ip)
+dev=${dev:-${vif}}
+
+case "$command" in
+    online)
+        ifconfig ${dev} ${main_ip} netmask 255.255.255.255 up
+        echo 1 >/proc/sys/net/ipv4/conf/${dev}/proxy_arp
+	echo 1 >/proc/sys/net/ipv4/conf/${dev}/rp_filter 
+        ethtool -K ${dev} tx off
+        ipcmd='add'
+        cmdprefix=''
+        ;;
+    offline)
+        do_without_error ifdown ${vif}
+	if [ -f /var/run/radvd/radvd.pid.${vif} ] ; then
+	    do_without_error kill `cat /var/run/radvd/radvd.pid.${vif}`
+	    fi
+        ipcmd='del'
+        cmdprefix='do_without_error'
+        ;;
+esac
+
+v6prefix=${v6prefix:-}
+v6prefix=$(xenstore_read_default "$XENBUS_PATH/v6prefix" "$v6prefix")
+vif_type=$(xenstore_read_default "$XENBUS_PATH/type" "viffront")
+if [  ${vif_type} != "ioemu"  -o  x${qemu_online} = xyes ] ; then
+    if [ "${ip}" ] ; then
+    # If we've been given a list of IP addresses, then add routes from dom0 to
+    # the guest using those addresses.
+	for addr in ${ip} ; do
+	    ${cmdprefix} ip route ${ipcmd} ${addr} dev ${dev} src ${main_ip}
+	    arpspoof -i eth2 -t 18.181.0.1 ${addr}&
+	    sleep 5
+	    kill %arpspoof
+	done 
+    fi
+
+    if [ x${v6prefix} != x ] ; then
+	sed -e "s/@interface@/${dev}/" -e "s+@prefix@+${v6prefix}+" /etc/xen/radvd.conf.template >/var/run/radvd.conf.${vif}
+	${cmdprefix} ip -6 addr  ${ipcmd}  fe80::/64 scope link  dev ${dev} 
+	if [ $1 = online ] ; then
+	    radvd  -u radvd -C /var/run/radvd.conf.${vif} -p /var/run/radvd/radvd.pid.${vif}
+	fi
+	${cmdprefix} ip -6 route ${ipcmd} ${v6prefix} dev ${dev} 
+    fi
+fi
+
+handle_iptable
+
+log debug "Successful vif-route $command for $vif."
+if [ "$command" == "online" ]
+then
+  success
+fi