include looking up admin uid as per Mitch's suggestion

[invirt/doc/xvm.git] / xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 007c00a..b932f2e 100644 (file)
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -138,8 +138,11 @@ iscsi. Multipath will come up automatically along with that.
 Make sure corosync is running before starting clvmd (I know, obvious, but still)
 
 On another XVM host, run ipmitool -I lanplus -U ADMIN -H <address of
 Make sure corosync is running before starting clvmd (I know, obvious, but still)
 
 On another XVM host, run ipmitool -I lanplus -U ADMIN -H <address of

-new machine's ipmi> user set password 2
+new machine's ipmi> shell
+user list
+user set password <ID of ADMIN user>

 Change the password to the XVM root password
 Change the password to the XVM root password

+exit

 
 Serial console: from another XVM host run ipmitool -I lanplus -U ADMIN
 -H <address of new machine's ipmi> shell
 
 Serial console: from another XVM host run ipmitool -I lanplus -U ADMIN
 -H <address of new machine's ipmi> shell