Adding iSCSI magic ping addresses

[invirt/doc/xvm.git] / xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 4a078d1..ecbee9f 100644 (file)
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -77,6 +77,10 @@ Currently allocated backend IPs:
 18.4.58.232 new a-s IPMI
 18.4.58.233 new s-m IPMI
 18.4.58.234 new a-m IPMI
 18.4.58.232 new a-s IPMI
 18.4.58.233 new s-m IPMI
 18.4.58.234 new a-m IPMI

+18.4.58.235 new d-o IPMI
+18.4.58.236 new g-d IPMI
+18.4.58.237 new b-f IPMI
+18.4.58.238 new m-a IPMI

 
 
 10.6.128.16 c-s
 
 
 10.6.128.16 c-s

@@ -120,8 +124,35 @@ net.ipv4.conf.eth0.rp_filter = 0
 net.ipv4.conf.eth1.rp_filter = 0
 net.ipv4.conf.all.rp_filter = 0
 
 net.ipv4.conf.eth1.rp_filter = 0
 net.ipv4.conf.all.rp_filter = 0
 

+Comment out in /etc/init.d/clvm:
+# if [ ! -f /etc/cluster/cluster.conf ]; then
+#       log_failure_msg "clvmd: cluster not configured. Aborting."
+#       exit 0
+# fi
+
+# if ! cman_tool status >/dev/null 2>&1; then
+#       log_failure_msg "clvmd: cluster is not running. Aborting."
+#       exit 0
+# fi
+
+

 On boot, you'll need to run /usr/lib/xvm-iscsi-connect to bring up
 iscsi. Multipath will come up automatically along with that.
 
 Make sure corosync is running before starting clvmd (I know, obvious, but still)
 
 On boot, you'll need to run /usr/lib/xvm-iscsi-connect to bring up
 iscsi. Multipath will come up automatically along with that.
 
 Make sure corosync is running before starting clvmd (I know, obvious, but still)
 

+Copy /etc/init/ttyhvc0.conf from another new host
+
+On another XVM host, run ipmitool -I lanplus -U ADMIN -H <address of
+new machine's ipmi> shell
+user list
+user set password <ID of ADMIN user>
+Change the password to the XVM root password
+exit
+
+Serial console: from another XVM host run ipmitool -I lanplus -U ADMIN
+-H <address of new machine's ipmi> shell
+sol activate
+
+To bring up the iSCSI backend, you'll need to ping:
+ping 18.4.{58,59}.{128,129}