Collect information about the various init script priorities we use

[invirt/doc/xvm.git] / xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 088cb54..1bc3914 100644 (file)
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -6,6 +6,12 @@ in the setup screen at F2:
 - CPU -> Virtualization Technology: on
 - Boot Sequence: disable NIC
 - Integrated Devices -> Embedded Gb NIC: turn off PXE
+- Serial Communication:
+  - Serial Communication: On with Console Redirection via COM2
+  - External Serial Connector: COM1
+  - Failsafe Baud Rate: 57600
+  - Remote Terminal Type: VT100/VT220
+  - Redirection After Boot: Disabled
 
 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN
@@ -14,10 +20,9 @@ in the setup screen for remote management, at Ctrl-E:
 - netmask is 255.255.0.0
 - Set the password to the XVM root
 
-All of these settings are reflected on all 4 servers in the production
+All of these settings are reflected on all 8 servers in the production
 cluster.
 
-
 In the debian installer:
  - 500M for /boot in raid1 of sda1, sdb1
  - rest for LVM in raid1 of sda2, sdb2
@@ -26,3 +31,39 @@ In the debian installer:
  - install a vanilla kernel, not xen;
    will install xen hypervisor from backports in our later custom install.
 
+
+Currently allocated backend IPs:
+
+10.5.128.16 c-s
+10.5.128.17 a-s
+10.5.128.18 s-m
+10.5.128.19 a-m
+10.5.128.20 d-o
+10.5.128.21 g-d
+10.5.128.22 b-f
+10.5.128.23 m-a (not installed)
+
+10.5.128.128 RAID group portal
+10.5.128.129 RAID device/management
+
+10.5.128.221 c-s IPMI
+10.5.128.222 a-s IPMI
+10.5.128.223 s-m IPMI
+10.5.128.224 a-m IPMI
+10.5.128.225 d-o IPMI
+10.5.128.226 g-d IPMI (currently unplugged)
+10.5.128.227 b-f IPMI
+10.5.128.228 m-a IPMI (not configured)
+
+10.6.128.16 c-s
+10.6.128.17 a-s
+10.6.128.18 s-m
+10.6.128.19 a-m
+10.6.128.20 d-o
+10.6.128.21 g-d
+10.6.128.22 b-f
+10.6.128.23 m-a (not installed)
+
+10.6.128.129 RAID device/management
+
+10.6.128.229 g-d IPMI (temporary hardware)