- CPU -> Virtualization Technology: on
- Boot Sequence: disable NIC
- Integrated Devices -> Embedded Gb NIC: turn off PXE
+- Serial Communication:
+ - Serial Communication: On with Console Redirection via COM2
+ - External Serial Connector: COM1
+ - Failsafe Baud Rate: 57600
+ - Remote Terminal Type: VT100/VT220
+ - Redirection After Boot: Disabled
in the setup screen for remote management, at Ctrl-E:
+- Turn on IPMI over LAN
- IP is (main IP) =~ s/18.181.0/10.5.128/
e.g. 10.5.128.221 for citadel-station == 18.181.0.221
+- netmask is 255.255.0.0
+- Set the password to the XVM root
+
+All of these settings are reflected on all 4 servers in the production
+cluster.
+
+
+In the debian installer:
+ - 500M for /boot in raid1 of sda1, sdb1
+ - rest for LVM in raid1 of sda2, sdb2
+ - 50G /
+ - 25G swap
+ - install a vanilla kernel, not xen;
+ will install xen hypervisor from backports in our later custom install.
-These are the settings made on xvm-host-2 aka aperture-science.
-The settings on xvm-host-1 aka citadel-station may be slightly
-different, and should be reconciled with these. At time of writing,
-xvm-host-[34] remain in their shipping boxes.