1 invirt-autoinstaller (0.0.35~glasgall2) precise; urgency=low
3 * Remove old symlinks from invirt-autoinstaller-host.links; they're
6 -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 16:52:27 -0400
8 invirt-autoinstaller (0.0.35~glasgall1) precise; urgency=low
10 * Update xen device names + add xen-create-image symlink for precise
12 -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 16:47:10 -0400
14 invirt-autoinstaller (0.0.34) unstable; urgency=low
16 * Add a missing dependency for the host on kpartx.
18 -- Evan Broder <broder@mit.edu> Sun, 30 May 2010 11:32:43 -0400
20 invirt-autoinstaller (0.0.33) unstable; urgency=low
22 * Don't hardcode netmask and gateway
24 -- Greg Brockman <gdb@mit.edu> Fri, 01 Jan 2010 23:31:55 -0500
26 invirt-autoinstaller (0.0.32) unstable; urgency=low
28 * Revert 0.0.31 - it didn't work, and left autoinstalled VMs that used
29 to work without anything in their grub menu.lst.
31 -- Evan Broder <broder@mit.edu> Thu, 13 Aug 2009 08:35:50 -0700
33 invirt-autoinstaller (0.0.31) unstable; urgency=low
35 * Hack to be differently specific when replacing the root= lines. This
36 should replace both the actual grub config lines and the kopt line,
37 but leave lines like groot alone.
39 -- Evan Broder <broder@mit.edu> Tue, 28 Jul 2009 14:39:25 -0700
41 invirt-autoinstaller (0.0.30) unstable; urgency=low
43 * When we're installing the world, be sure to block debconf prompts from
46 -- Evan Broder <broder@mit.edu> Sun, 26 Jul 2009 19:59:01 -0700
48 invirt-autoinstaller (0.0.29) unstable; urgency=low
50 * Be more specific when replacing root= lines with UUID equivalents in
51 the grub menu.lst. This avoids replacing things like groot, which
54 -- Evan Broder <broder@mit.edu> Sat, 13 Jun 2009 19:33:01 -0700
56 invirt-autoinstaller (0.0.28) unstable; urgency=low
58 * We're using bashisms in 93-setup-grub, so let's use bash.
60 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 02:40:54 -0400
62 invirt-autoinstaller (0.0.27) unstable; urgency=low
64 * Correctly detect what the path to the block devices in fstab are.
65 * Never prompt when updating the grub config after frobbing it.
67 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 01:40:55 -0400
69 invirt-autoinstaller (0.0.26) unstable; urgency=low
71 * Switch the grub config and /etc/fstab to using UUIDs for specifying
72 the boot and swap partitions.
74 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 01:18:45 -0400
76 invirt-autoinstaller (0.0.25) unstable; urgency=low
78 * Uh...right. Let's edit the event.d file and menu.lst within the
79 install prefix for Intrepid/Jaunty.
81 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 00:14:50 -0400
83 invirt-autoinstaller (0.0.24) unstable; urgency=low
85 * Add a new version of our patches to work with the current Ubuntu
86 update-grub, instead of trying to use the indomU variable (which still
87 excludes kernels from showing up in the menu.lst).
89 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 23:45:03 -0400
91 invirt-autoinstaller (0.0.23) unstable; urgency=low
93 * Create the shell of a menu.lst file needed to successfully parse
94 indomU=true out of it.
96 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 22:56:30 -0400
98 invirt-autoinstaller (0.0.22) unstable; urgency=low
100 * For Jaunty systems, edit /boot/grub/menu.lst appropriately to work
101 with the fix for LP #291256.
103 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 22:20:29 -0400
105 invirt-autoinstaller (0.0.21) unstable; urgency=low
107 * Create xen-tools symlinks for installing Intrepid and Jaunty.
109 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 21:41:43 -0400
111 invirt-autoinstaller (0.0.20) unstable; urgency=low
113 * Update the setup-grub hook to work with pv_ops Ubuntu kernels.
115 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 21:33:44 -0400
117 invirt-autoinstaller (0.0.19) unstable; urgency=low
121 -- Greg Price <price@mit.edu> Thu, 19 Feb 2009 03:15:03 -0500
123 invirt-autoinstaller (0.0.18) unstable; urgency=low
125 * Renumber our 9x-* hook scripts to make some room.
126 * Move 36-clear-root-password to 96- so it sticks.
128 -- Greg Price <price@mit.edu> Thu, 19 Feb 2009 03:03:39 -0500
130 invirt-autoinstaller (0.0.17) unstable; urgency=low
132 * Unset root password in xen-create-image.
133 * Don't bother unsetting the password in the installer image, because it
134 doesn't actually affect the guest.
136 -- Greg Price <price@mit.edu> Wed, 18 Feb 2009 22:12:26 -0500
138 invirt-autoinstaller (0.0.16) unstable; urgency=low
140 * Unset root password in guest, so it's unset in autoinstalled images.
142 -- Greg Price <price@mit.edu> Wed, 18 Feb 2009 02:39:29 -0500
144 invirt-autoinstaller (0.0.15) unstable; urgency=low
146 * Poke policy-rc.d while using aptitude so we don't try to start daemons.
148 -- Greg Price <price@mit.edu> Wed, 18 Feb 2009 00:30:45 -0500
150 invirt-autoinstaller (0.0.14) jaunty; urgency=low
152 * Don't confuse MB with MiB.
154 -- Anders Kaseorg <andersk@mit.edu> Tue, 17 Feb 2009 04:56:38 -0500
156 invirt-autoinstaller (0.0.13) unstable; urgency=low
158 * Don't hang indefinitely waiting for input from a user that can't talk
161 -- Evan Broder <broder@mit.edu> Sun, 15 Feb 2009 03:54:10 -0500
163 invirt-autoinstaller (0.0.12) unstable; urgency=low
165 * TTANTS: Conflicts. Depends.
167 -- Evan Broder <broder@mit.edu> Sat, 14 Feb 2009 22:38:48 -0500
169 invirt-autoinstaller (0.0.11) unstable; urgency=low
171 * Require aptitude in the autoinstaller guest - and use it in
172 invirt-update-ai-guest.
174 -- Evan Broder <broder@mit.edu> Sat, 14 Feb 2009 22:32:32 -0500
176 invirt-autoinstaller (0.0.10) unstable; urgency=low
178 * Serial consoles are supposed to run at 115200 baud, not 115300.
179 * Install a more complete base system on Debian.
181 -- Evan Broder <broder@mit.edu> Sat, 14 Feb 2009 21:29:07 -0500
183 invirt-autoinstaller (0.0.9) unstable; urgency=low
185 * xen-utils recommends a Xen hypervisor. We don't want one.
187 -- Evan Broder <broder@mit.edu> Sat, 31 Jan 2009 23:39:06 -0500
189 invirt-autoinstaller (0.0.8) unstable; urgency=low
191 * Actually install a useful base system by pulling in ubuntu-minimal and
192 ubuntu-standard (sorry, Debian).
194 -- Evan Broder <broder@mit.edu> Sat, 31 Jan 2009 22:51:00 -0500
196 invirt-autoinstaller (0.0.7) unstable; urgency=low
198 * Add a script to update the autoinstaller disk from a host.
199 * Use a more stringent regexp and fail loudly if the match fails.
200 * Turn off transmission segmentation offloading instead of tx checksum
203 -- Evan Broder <broder@mit.edu> Mon, 26 Jan 2009 20:57:09 -0500
205 invirt-autoinstaller (0.0.6) unstable; urgency=low
207 * Correct for the checksumming issue in /etc/network/interfaces instead
210 -- Evan Broder <broder@mit.edu> Mon, 26 Jan 2009 07:40:30 -0500
212 invirt-autoinstaller (0.0.5) unstable; urgency=low
214 * Install Debian and Ubuntu compatible kernels without checking first
216 -- Evan Broder <broder@mit.edu> Wed, 19 Nov 2008 20:51:20 -0500
218 invirt-autoinstaller (0.0.4) unstable; urgency=low
220 * Figure out whether the autoinstaller is running on Debian or Ubuntu,
221 and install an appropriate kernel
223 -- Evan Broder <broder@mit.edu> Wed, 19 Nov 2008 19:53:25 -0500
225 invirt-autoinstaller (0.0.3) unstable; urgency=low
227 * Whoops - replace the right string in /etc/rc.local
229 -- Evan Broder <broder@mit.edu> Fri, 14 Nov 2008 01:59:11 -0500
231 invirt-autoinstaller (0.0.2) unstable; urgency=low
233 * Add hook to turn off checksumming in guests
235 -- Evan Broder <broder@mit.edu> Fri, 14 Nov 2008 01:19:21 -0500
237 invirt-autoinstaller (0.0.1) unstable; urgency=low
239 * sipb-xen-autoinstaler -> invirt-autoinstaller
240 * Punt DEB_AUTO_UPDATE_DEBIAN_CONTROL
242 -- Evan Broder <broder@mit.edu> Sat, 01 Nov 2008 04:47:25 -0400
244 sipb-xen-autoinstaller (2.11) unstable; urgency=low
246 * sipb-xen-dom0 -> invirt-xen-config
248 -- Evan Broder <broder@mit.edu> Sat, 25 Oct 2008 18:18:51 -0400
250 sipb-xen-autoinstaller (2.10) unstable; urgency=low
252 * Hide misleading harmless error message from dmsetup
253 * Start udev in guest, so /dev/hda[12] appear automatically
254 * understand 'noinstall=' rather than 'noinstall', so validator on
257 -- Greg Price <price@mit.edu> Sun, 19 Oct 2008 21:26:31 -0400
259 sipb-xen-autoinstaller (2.9) unstable; urgency=low
261 * Run xen-create-image with --verbose so you actually get useful
264 -- Evan Broder <broder@mit.edu> Tue, 14 Oct 2008 19:25:14 -0400
266 sipb-xen-autoinstaller (2.8) unstable; urgency=low
268 * Correctly evaluate the kernel command line to deal with weird
269 potential quoting issues
271 -- Evan Broder <broder@mit.edu> Mon, 13 Oct 2008 21:18:22 -0400
273 sipb-xen-autoinstaller (2.7) unstable; urgency=low
275 * Skip kpartx call when running on physical devices
277 -- Evan Broder <broder@mit.edu> Tue, 07 Oct 2008 00:25:18 -0400
279 sipb-xen-autoinstaller (2.6) unstable; urgency=low
281 * Update dependencies for Hardy
283 -- Evan Broder <broder@mit.edu> Mon, 06 Oct 2008 18:22:08 -0400
285 sipb-xen-autoinstaller (2.5) unstable; urgency=low
287 * Add sipb-xen-autoinstaller-host binary package
288 * Put common files in both binary packages
289 * Add beginnings of an installer script in -host package
291 -- Greg Price <price@mit.edu> Sun, 28 Sep 2008 17:07:51 -0400
293 sipb-xen-autoinstaller (2.4) unstable; urgency=low
295 * Switch to using just sipb-database options on the host
297 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 03:18:00 -0400
299 sipb-xen-autoinstaller (2.3) unstable; urgency=low
303 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 01:06:18 -0400
305 sipb-xen-autoinstaller (2.2) unstable; urgency=low
307 * Divert /etc/init.d/rcS
309 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 00:28:54 -0400
311 sipb-xen-autoinstaller (2.1) unstable; urgency=low
313 * Updates to the dependency lists.
315 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 00:02:39 -0400
317 sipb-xen-autoinstaller (2.0) unstable; urgency=low
319 * Move the autoinstall inside a VM.
321 -- Eric Price <ecprice@mit.edu> Sun, 27 Jul 2008 23:47:02 -0400
323 sipb-xen-guest-installer (1.4) unstable; urgency=low
325 * sipb-xen-install, using xen-create-image, which uses debootstrap
326 (ecprice, neboat, and me, weeks ago)
328 -- Greg Price <price@mit.edu> Wed, 23 Jul 2008 01:15:58 -0400
330 sipb-xen-guest-installer (1.3) unstable; urgency=low
332 * Change sipb-xen-lvcopy so that it fails if you try to clone
335 -- Evan Broder <broder@mit.edu> Sat, 31 May 2008 13:38:37 -0700
337 sipb-xen-guest-installer (1.2) unstable; urgency=low
339 * Work around bug in Python subprocess.
341 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Thu, 15 May 2008 18:46:57 -0400
343 sipb-xen-guest-installer (1.1) unstable; urgency=low
345 * All the changes since last October. In particular:
346 * This system is in "production", using sx-lvcopy to replicate
347 a golden image on user request and frob it as necessary.
349 -- Greg Price <price@mit.edu> Thu, 1 May 2008 01:09:11 -0400
351 sipb-xen-guest-installer (1.0) unstable; urgency=low
355 -- Greg Price <price@mega-man.mit.edu> Tue, 16 Oct 2007 03:01:08 -0400