1 invirt-autoinstaller (0.0.35~glasgall1) precise; urgency=low
3 * Update xen device names + add xen-create-image symlink for precise
5 -- Adam Glasgall <glasgall@mit.edu> Sat, 13 Apr 2013 16:47:10 -0400
7 invirt-autoinstaller (0.0.34) unstable; urgency=low
9 * Add a missing dependency for the host on kpartx.
11 -- Evan Broder <broder@mit.edu> Sun, 30 May 2010 11:32:43 -0400
13 invirt-autoinstaller (0.0.33) unstable; urgency=low
15 * Don't hardcode netmask and gateway
17 -- Greg Brockman <gdb@mit.edu> Fri, 01 Jan 2010 23:31:55 -0500
19 invirt-autoinstaller (0.0.32) unstable; urgency=low
21 * Revert 0.0.31 - it didn't work, and left autoinstalled VMs that used
22 to work without anything in their grub menu.lst.
24 -- Evan Broder <broder@mit.edu> Thu, 13 Aug 2009 08:35:50 -0700
26 invirt-autoinstaller (0.0.31) unstable; urgency=low
28 * Hack to be differently specific when replacing the root= lines. This
29 should replace both the actual grub config lines and the kopt line,
30 but leave lines like groot alone.
32 -- Evan Broder <broder@mit.edu> Tue, 28 Jul 2009 14:39:25 -0700
34 invirt-autoinstaller (0.0.30) unstable; urgency=low
36 * When we're installing the world, be sure to block debconf prompts from
39 -- Evan Broder <broder@mit.edu> Sun, 26 Jul 2009 19:59:01 -0700
41 invirt-autoinstaller (0.0.29) unstable; urgency=low
43 * Be more specific when replacing root= lines with UUID equivalents in
44 the grub menu.lst. This avoids replacing things like groot, which
47 -- Evan Broder <broder@mit.edu> Sat, 13 Jun 2009 19:33:01 -0700
49 invirt-autoinstaller (0.0.28) unstable; urgency=low
51 * We're using bashisms in 93-setup-grub, so let's use bash.
53 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 02:40:54 -0400
55 invirt-autoinstaller (0.0.27) unstable; urgency=low
57 * Correctly detect what the path to the block devices in fstab are.
58 * Never prompt when updating the grub config after frobbing it.
60 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 01:40:55 -0400
62 invirt-autoinstaller (0.0.26) unstable; urgency=low
64 * Switch the grub config and /etc/fstab to using UUIDs for specifying
65 the boot and swap partitions.
67 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 01:18:45 -0400
69 invirt-autoinstaller (0.0.25) unstable; urgency=low
71 * Uh...right. Let's edit the event.d file and menu.lst within the
72 install prefix for Intrepid/Jaunty.
74 -- Evan Broder <broder@mit.edu> Sun, 03 May 2009 00:14:50 -0400
76 invirt-autoinstaller (0.0.24) unstable; urgency=low
78 * Add a new version of our patches to work with the current Ubuntu
79 update-grub, instead of trying to use the indomU variable (which still
80 excludes kernels from showing up in the menu.lst).
82 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 23:45:03 -0400
84 invirt-autoinstaller (0.0.23) unstable; urgency=low
86 * Create the shell of a menu.lst file needed to successfully parse
87 indomU=true out of it.
89 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 22:56:30 -0400
91 invirt-autoinstaller (0.0.22) unstable; urgency=low
93 * For Jaunty systems, edit /boot/grub/menu.lst appropriately to work
94 with the fix for LP #291256.
96 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 22:20:29 -0400
98 invirt-autoinstaller (0.0.21) unstable; urgency=low
100 * Create xen-tools symlinks for installing Intrepid and Jaunty.
102 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 21:41:43 -0400
104 invirt-autoinstaller (0.0.20) unstable; urgency=low
106 * Update the setup-grub hook to work with pv_ops Ubuntu kernels.
108 -- Evan Broder <broder@mit.edu> Sat, 02 May 2009 21:33:44 -0400
110 invirt-autoinstaller (0.0.19) unstable; urgency=low
114 -- Greg Price <price@mit.edu> Thu, 19 Feb 2009 03:15:03 -0500
116 invirt-autoinstaller (0.0.18) unstable; urgency=low
118 * Renumber our 9x-* hook scripts to make some room.
119 * Move 36-clear-root-password to 96- so it sticks.
121 -- Greg Price <price@mit.edu> Thu, 19 Feb 2009 03:03:39 -0500
123 invirt-autoinstaller (0.0.17) unstable; urgency=low
125 * Unset root password in xen-create-image.
126 * Don't bother unsetting the password in the installer image, because it
127 doesn't actually affect the guest.
129 -- Greg Price <price@mit.edu> Wed, 18 Feb 2009 22:12:26 -0500
131 invirt-autoinstaller (0.0.16) unstable; urgency=low
133 * Unset root password in guest, so it's unset in autoinstalled images.
135 -- Greg Price <price@mit.edu> Wed, 18 Feb 2009 02:39:29 -0500
137 invirt-autoinstaller (0.0.15) unstable; urgency=low
139 * Poke policy-rc.d while using aptitude so we don't try to start daemons.
141 -- Greg Price <price@mit.edu> Wed, 18 Feb 2009 00:30:45 -0500
143 invirt-autoinstaller (0.0.14) jaunty; urgency=low
145 * Don't confuse MB with MiB.
147 -- Anders Kaseorg <andersk@mit.edu> Tue, 17 Feb 2009 04:56:38 -0500
149 invirt-autoinstaller (0.0.13) unstable; urgency=low
151 * Don't hang indefinitely waiting for input from a user that can't talk
154 -- Evan Broder <broder@mit.edu> Sun, 15 Feb 2009 03:54:10 -0500
156 invirt-autoinstaller (0.0.12) unstable; urgency=low
158 * TTANTS: Conflicts. Depends.
160 -- Evan Broder <broder@mit.edu> Sat, 14 Feb 2009 22:38:48 -0500
162 invirt-autoinstaller (0.0.11) unstable; urgency=low
164 * Require aptitude in the autoinstaller guest - and use it in
165 invirt-update-ai-guest.
167 -- Evan Broder <broder@mit.edu> Sat, 14 Feb 2009 22:32:32 -0500
169 invirt-autoinstaller (0.0.10) unstable; urgency=low
171 * Serial consoles are supposed to run at 115200 baud, not 115300.
172 * Install a more complete base system on Debian.
174 -- Evan Broder <broder@mit.edu> Sat, 14 Feb 2009 21:29:07 -0500
176 invirt-autoinstaller (0.0.9) unstable; urgency=low
178 * xen-utils recommends a Xen hypervisor. We don't want one.
180 -- Evan Broder <broder@mit.edu> Sat, 31 Jan 2009 23:39:06 -0500
182 invirt-autoinstaller (0.0.8) unstable; urgency=low
184 * Actually install a useful base system by pulling in ubuntu-minimal and
185 ubuntu-standard (sorry, Debian).
187 -- Evan Broder <broder@mit.edu> Sat, 31 Jan 2009 22:51:00 -0500
189 invirt-autoinstaller (0.0.7) unstable; urgency=low
191 * Add a script to update the autoinstaller disk from a host.
192 * Use a more stringent regexp and fail loudly if the match fails.
193 * Turn off transmission segmentation offloading instead of tx checksum
196 -- Evan Broder <broder@mit.edu> Mon, 26 Jan 2009 20:57:09 -0500
198 invirt-autoinstaller (0.0.6) unstable; urgency=low
200 * Correct for the checksumming issue in /etc/network/interfaces instead
203 -- Evan Broder <broder@mit.edu> Mon, 26 Jan 2009 07:40:30 -0500
205 invirt-autoinstaller (0.0.5) unstable; urgency=low
207 * Install Debian and Ubuntu compatible kernels without checking first
209 -- Evan Broder <broder@mit.edu> Wed, 19 Nov 2008 20:51:20 -0500
211 invirt-autoinstaller (0.0.4) unstable; urgency=low
213 * Figure out whether the autoinstaller is running on Debian or Ubuntu,
214 and install an appropriate kernel
216 -- Evan Broder <broder@mit.edu> Wed, 19 Nov 2008 19:53:25 -0500
218 invirt-autoinstaller (0.0.3) unstable; urgency=low
220 * Whoops - replace the right string in /etc/rc.local
222 -- Evan Broder <broder@mit.edu> Fri, 14 Nov 2008 01:59:11 -0500
224 invirt-autoinstaller (0.0.2) unstable; urgency=low
226 * Add hook to turn off checksumming in guests
228 -- Evan Broder <broder@mit.edu> Fri, 14 Nov 2008 01:19:21 -0500
230 invirt-autoinstaller (0.0.1) unstable; urgency=low
232 * sipb-xen-autoinstaler -> invirt-autoinstaller
233 * Punt DEB_AUTO_UPDATE_DEBIAN_CONTROL
235 -- Evan Broder <broder@mit.edu> Sat, 01 Nov 2008 04:47:25 -0400
237 sipb-xen-autoinstaller (2.11) unstable; urgency=low
239 * sipb-xen-dom0 -> invirt-xen-config
241 -- Evan Broder <broder@mit.edu> Sat, 25 Oct 2008 18:18:51 -0400
243 sipb-xen-autoinstaller (2.10) unstable; urgency=low
245 * Hide misleading harmless error message from dmsetup
246 * Start udev in guest, so /dev/hda[12] appear automatically
247 * understand 'noinstall=' rather than 'noinstall', so validator on
250 -- Greg Price <price@mit.edu> Sun, 19 Oct 2008 21:26:31 -0400
252 sipb-xen-autoinstaller (2.9) unstable; urgency=low
254 * Run xen-create-image with --verbose so you actually get useful
257 -- Evan Broder <broder@mit.edu> Tue, 14 Oct 2008 19:25:14 -0400
259 sipb-xen-autoinstaller (2.8) unstable; urgency=low
261 * Correctly evaluate the kernel command line to deal with weird
262 potential quoting issues
264 -- Evan Broder <broder@mit.edu> Mon, 13 Oct 2008 21:18:22 -0400
266 sipb-xen-autoinstaller (2.7) unstable; urgency=low
268 * Skip kpartx call when running on physical devices
270 -- Evan Broder <broder@mit.edu> Tue, 07 Oct 2008 00:25:18 -0400
272 sipb-xen-autoinstaller (2.6) unstable; urgency=low
274 * Update dependencies for Hardy
276 -- Evan Broder <broder@mit.edu> Mon, 06 Oct 2008 18:22:08 -0400
278 sipb-xen-autoinstaller (2.5) unstable; urgency=low
280 * Add sipb-xen-autoinstaller-host binary package
281 * Put common files in both binary packages
282 * Add beginnings of an installer script in -host package
284 -- Greg Price <price@mit.edu> Sun, 28 Sep 2008 17:07:51 -0400
286 sipb-xen-autoinstaller (2.4) unstable; urgency=low
288 * Switch to using just sipb-database options on the host
290 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 03:18:00 -0400
292 sipb-xen-autoinstaller (2.3) unstable; urgency=low
296 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 01:06:18 -0400
298 sipb-xen-autoinstaller (2.2) unstable; urgency=low
300 * Divert /etc/init.d/rcS
302 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 00:28:54 -0400
304 sipb-xen-autoinstaller (2.1) unstable; urgency=low
306 * Updates to the dependency lists.
308 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Mon, 28 Jul 2008 00:02:39 -0400
310 sipb-xen-autoinstaller (2.0) unstable; urgency=low
312 * Move the autoinstall inside a VM.
314 -- Eric Price <ecprice@mit.edu> Sun, 27 Jul 2008 23:47:02 -0400
316 sipb-xen-guest-installer (1.4) unstable; urgency=low
318 * sipb-xen-install, using xen-create-image, which uses debootstrap
319 (ecprice, neboat, and me, weeks ago)
321 -- Greg Price <price@mit.edu> Wed, 23 Jul 2008 01:15:58 -0400
323 sipb-xen-guest-installer (1.3) unstable; urgency=low
325 * Change sipb-xen-lvcopy so that it fails if you try to clone
328 -- Evan Broder <broder@mit.edu> Sat, 31 May 2008 13:38:37 -0700
330 sipb-xen-guest-installer (1.2) unstable; urgency=low
332 * Work around bug in Python subprocess.
334 -- Eric Price <ecprice@sipb-xen-dev.mit.edu> Thu, 15 May 2008 18:46:57 -0400
336 sipb-xen-guest-installer (1.1) unstable; urgency=low
338 * All the changes since last October. In particular:
339 * This system is in "production", using sx-lvcopy to replicate
340 a golden image on user request and frob it as necessary.
342 -- Greg Price <price@mit.edu> Thu, 1 May 2008 01:09:11 -0400
344 sipb-xen-guest-installer (1.0) unstable; urgency=low
348 -- Greg Price <price@mega-man.mit.edu> Tue, 16 Oct 2007 03:01:08 -0400