+++ /dev/null
-#### Contents of the preconfiguration file
-d-i debian-installer/locale string en_US
-d-i console-keymaps-at/keymap select us
-
-### Network configuration
-# netcfg will choose an interface that has link if possible. This makes it
-# skip displaying a list if there is more than one interface.
-d-i netcfg/choose_interface select auto
-
-#d-i netcfg/dhcp_timeout string 1
-d-i netcfg/use_dhcp boolean true
-
-# Any hostname and domain names assigned from dhcp take precedence over
-# values set here. However, setting the values still prevents the questions
-# from being shown, even if values come from dhcp.
-# at bottom #d-i netcfg/get_hostname string fillme
-d-i netcfg/get_domain string mit.edu
-
-# Disable that annoying WEP key dialog.
-d-i netcfg/wireless_wep string
-
-### Mirror settings
-# If you select ftp, the mirror/country string does not need to be set.
-#d-i mirror/protocol string ftp
-d-i mirror/country string enter information manually
-d-i mirror/http/hostname string debian.lcs.mit.edu
-d-i mirror/http/directory string /debian
-d-i mirror/http/proxy string
-
-# Suite to install.
-#d-i mirror/suite string testing
-# Suite to use for loading installer components (optional).
-#d-i mirror/udeb/suite string testing
-
-### Partitioning
-# If the system has free space you can choose to only partition that space.
-# Note: this must be preseeded with a localized (translated) value.
-#d-i partman-auto/init_automatically_partition \
-# select Guided - use the largest continuous free space
-
-# Alternatively, you can specify a disk to partition. The device name
-# can be given in either devfs or traditional non-devfs format.
-# For example, to use the first disk:
-d-i partman-auto/disk string /dev/discs/disc0/disc
-# In addition, you'll need to specify the method to use.
-# The presently available methods are: "regular", "lvm" and "crypto"
-d-i partman-auto/method string regular
-
-# If one of the disks that are going to be automatically partitioned
-# contains an old LVM configuration, the user will normally receive a
-# warning. This can be preseeded away...
-d-i partman-auto/purge_lvm_from_device boolean true
-# And the same goes for the confirmation to write the lvm partitions.
-#d-i partman-lvm/confirm boolean true
-
-# You can choose from any of the predefined partitioning recipes.
-# Note: this must be preseeded with a localized (translated) value.
-d-i partman-auto/choose_recipe \
- select All files in one partition (recommended for new users)
-#d-i partman-auto/choose_recipe \
-# select Separate /home partition
-#d-i partman-auto/choose_recipe \
-# select Separate /home, /usr, /var, and /tmp partitions
-
-# Or provide a recipe of your own...
-# The recipe format is documented in the file devel/partman-auto-recipe.txt.
-# If you have a way to get a recipe file into the d-i environment, you can
-# just point at it.
-#d-i partman-auto/expert_recipe_file string /hd-media/recipe
-
-# If not, you can put an entire recipe into the preconfiguration file in one
-# (logical) line. This example creates a small /boot partition, suitable
-# swap, and uses the rest of the space for the root partition:
-#d-i partman-auto/expert_recipe string \
-# boot-root :: \
-# 40 50 100 ext3 \
-# $primary{ } $bootable{ } \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ /boot } \
-# . \
-# 500 10000 1000000000 ext3 \
-# method{ format } format{ } \
-# use_filesystem{ } filesystem{ ext3 } \
-# mountpoint{ / } \
-# . \
-# 64 512 300% linux-swap \
-# method{ swap } format{ } \
-# .
-
-# This makes partman automatically partition without confirmation.
-d-i partman/confirm_write_new_label boolean true
-d-i partman/choose_partition \
- select Finish partitioning and write changes to disk
-d-i partman/confirm boolean true
-
-### Clock and time zone setup
-# Controls whether or not the hardware clock is set to UTC.
-d-i clock-setup/utc boolean true
-
-# You may set this to any valid setting for $TZ; see the contents of
-# /usr/share/zoneinfo/ for valid values.
-d-i time/zone string US/Eastern
-
-### Apt setup
-# You can choose to install non-free and contrib software.
-#d-i apt-setup/non-free boolean true
-#d-i apt-setup/contrib boolean true
-# Uncomment this if you don't want to use a network mirror.
-#d-i apt-setup/use_mirror boolean false
-# Uncomment this to avoid adding security sources, or
-# add a hostname to use a different server than security.debian.org.
-#d-i apt-setup/security_host string
-
-# Additional repositories, local[0-9] available
-#d-i apt-setup/local0/repository string \
-# deb http://local.server/debian stable main
-#d-i apt-setup/local0/comment string local server
-# Enable deb-src lines
-#d-i apt-setup/local0/source boolean true
-# URL to the public key of the local repository; you must provide a key or
-# apt will complain about the unauthenticated repository and so the
-# sources.list line will be left commented out
-#d-i apt-setup/local0/key string http://local.server/key
-
-# By default the installer requires that repositories be authenticated
-# using a known gpg key. This setting can be used to disable that
-# authentication. Warning: Insecure, not recommended.
-#d-i debian-installer/allow_unauthenticated string true
-
-### Account setup
-# Skip creation of a root account (normal user account will be able to
-# use sudo).
-#d-i passwd/root-login boolean false
-# Alternatively, to skip creation of a normal user account.
-d-i passwd/make-user boolean false
-
-# Root password, either in clear text
-#d-i passwd/root-password password r00tme
-#d-i passwd/root-password-again password r00tme
-# or encrypted using an MD5 hash.
-# at bottom #d-i passwd/root-password-crypted password [MD5 hash]
-
-# To create a normal user account.
-#d-i passwd/user-fullname string Debian User
-#d-i passwd/username string debian
-# Normal user's password, either in clear text
-#d-i passwd/user-password password insecure
-#d-i passwd/user-password-again password insecure
-# or encrypted using an MD5 hash.
-#d-i passwd/user-password-crypted password [MD5 hash]
-
-### Base system installation
-# Select the initramfs generator used to generate the initrd for 2.6 kernels.
-#d-i base-installer/kernel/linux/initramfs-generators string yaird
-
-### Boot loader installation
-# Grub is the default boot loader (for x86). If you want lilo installed
-# instead, uncomment this:
-#d-i grub-installer/skip boolean true
-
-# This is fairly safe to set, it makes grub install automatically to the MBR
-# if no other operating system is detected on the machine.
-d-i grub-installer/only_debian boolean true
-
-# This one makes grub-installer install to the MBR if it also finds some other
-# OS, which is less safe as it might not be able to boot that other OS.
-d-i grub-installer/with_other_os boolean true
-
-# Alternatively, if you want to install to a location other than the mbr,
-# uncomment and edit these lines:
-#d-i grub-installer/only_debian boolean false
-#d-i grub-installer/with_other_os boolean false
-#d-i grub-installer/bootdev string (hd0,0)
-# To install grub to multiple disks:
-#d-i grub-installer/bootdev string (hd0,0) (hd1,0) (hd2,0)
-
-### Package selection
-tasksel tasksel/first multiselect standard
-
-# Individual additional packages to install
-#d-i pkgsel/include string openssh-server build-essential
-
-### Finishing up the first stage install
-# Avoid that last message about the install being complete.
-d-i finish-install/reboot_in_progress note
-
-# This will prevent the installer from ejecting the CD during the reboot,
-# which is useful in some situations.
-#d-i cdrom-detect/eject boolean false
-
-### Preseeding other packages
-# Depending on what software you choose to install, or if things go wrong
-# during the installation process, it's possible that other questions may
-# be asked. You can preseed those too, of course. To get a list of every
-# possible question that could be asked during an install, do an
-# installation, and then run these commands:
-# debconf-get-selections --installer > file
-# debconf-get-selections >> file
-
-
-#### Advanced options
-### Running custom commands during the installation
-# d-i preseeding is inherently not secure. Nothing in the installer checks
-# for attempts at buffer overflows or other exploits of the values of a
-# preconfiguration file like this one. Only use preconfiguration files from
-# trusted locations! To drive that home, and because it's generally useful,
-# here's a way to run any shell command you'd like inside the installer,
-# automatically.
-
-# This first command is run as early as possible, just after
-# preseeding is read.
-#d-i preseed/early_command string anna-install some-udeb
-
-# This command is run just before the install finishes, but when there is
-# still a usable /target directory. You can chroot to /target and use it
-# directly, or use the apt-install and in-target commands to easily install
-# packages and run commands in the target system.
-#d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
-
-
-
-# sipb-xen: automatically filled-in values get appended here.
-# at bottom #d-i passwd/root-password-crypted password [MD5 hash]
projects / invirt/packages/invirt-autoinstaller.git / commitdiff
