--- /dev/null
+# -*- sh -*-
+
+#
+# Xend configuration file.
+#
+
+# This example configuration is appropriate for an installation that
+# utilizes a bridged network configuration. Access to xend via http
+# is disabled.
+
+# Commented out entries show the default for that entry, unless otherwise
+# specified.
+
+#(logfile /var/log/xen/xend.log)
+#(loglevel DEBUG)
+
+#(xend-http-server no)
+#(xend-unix-server no)
+#(xend-tcp-xmlrpc-server no)
+#(xend-unix-xmlrpc-server yes)
+#(xend-relocation-server no)
+
+#(xend-unix-path /var/lib/xend/xend-socket)
+
+# Port xend should use for the HTTP interface, if xend-http-server is set.
+#(xend-port 8000)
+
+# Port xend should use for the relocation interface, if xend-relocation-server
+# is set.
+#(xend-relocation-port 8002)
+
+# Address xend should listen on for HTTP connections, if xend-http-server is
+# set.
+# Specifying 'localhost' prevents remote connections.
+# Specifying the empty string '' (the default) allows all connections.
+#(xend-address '')
+#(xend-address localhost)
+
+# Address xend should listen on for relocation-socket connections, if
+# xend-relocation-server is set.
+# Meaning and default as for xend-address above.
+#(xend-relocation-address '')
+
+# The hosts allowed to talk to the relocation port. If this is empty (the
+# default), then all connections are allowed (assuming that the connection
+# arrives on a port and interface on which we are listening; see
+# xend-relocation-port and xend-relocation-address above). Otherwise, this
+# should be a space-separated sequence of regular expressions. Any host with
+# a fully-qualified domain name or an IP address that matches one of these
+# regular expressions will be accepted.
+#
+# For example:
+# (xend-relocation-hosts-allow '^localhost$ ^.*\.example\.org$')
+#
+#(xend-relocation-hosts-allow '')
+
+# The limit (in kilobytes) on the size of the console buffer
+#(console-limit 1024)
+
+##
+# To bridge network traffic, like this:
+#
+# dom0: fake eth0 -> vif0.0 -+
+# |
+# bridge -> real eth0 -> the network
+# |
+# domU: fake eth0 -> vifN.0 -+
+#
+# use
+#
+# (network-script network-bridge)
+#
+# Your default ethernet device is used as the outgoing interface, by default.
+# To use a different one (e.g. eth1) use
+#
+# (network-script 'network-bridge netdev=eth1')
+#
+# The bridge is named xenbr0, by default. To rename the bridge, use
+#
+# (network-script 'network-bridge bridge=<name>')
+#
+# It is possible to use the network-bridge script in more complicated
+# scenarios, such as having two outgoing interfaces, with two bridges, and
+# two fake interfaces per guest domain. To do things like this, write
+# yourself a wrapper script, and call network-bridge from it, as appropriate.
+#
+(network-script network-bridge)
+
+# The script used to control virtual interfaces. This can be overridden on a
+# per-vif basis when creating a domain or a configuring a new vif. The
+# vif-bridge script is designed for use with the network-bridge script, or
+# similar configurations.
+#
+# If you have overridden the bridge name using
+# (network-script 'network-bridge bridge=<name>') then you may wish to do the
+# same here. The bridge name can also be set when creating a domain or
+# configuring a new vif, but a value specified here would act as a default.
+#
+# If you are using only one bridge, the vif-bridge script will discover that,
+# so there is no need to specify it explicitly.
+#
+(vif-script vif-bridge)
+
+
+## Use the following if network traffic is routed, as an alternative to the
+# settings for bridged networking given above.
+#(network-script network-route)
+#(vif-script vif-route)
+
+
+## Use the following if network traffic is routed with NAT, as an alternative
+# to the settings for bridged networking given above.
+#(network-script network-nat)
+#(vif-script vif-nat)
+
+
+# Dom0 will balloon out when needed to free memory for domU.
+# dom0-min-mem is the lowest memory level (in MB) dom0 will get down to.
+# If dom0-min-mem=0, dom0 will never balloon out.
+(dom0-min-mem 196)
+
+# In SMP system, dom0 will use dom0-cpus # of CPUS
+# If dom0-cpus = 0, dom0 will take all cpus available
+(dom0-cpus 0)
+
+# Whether to enable core-dumps when domains crash.
+#(enable-dump no)
+
+# The tool used for initiating virtual TPM migration
+#(external-migration-tool '')
+
+# The interface for VNC servers to listen on. Defaults
+# to 127.0.0.1 To restore old 'listen everywhere' behaviour
+# set this to 0.0.0.0
+#(vnc-listen '127.0.0.1')
projects / invirt/packages/invirt-xen-config.git / commitdiff
