bios settings for new supermicro hardware

[invirt/doc/xvm.git] / xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 1bc3914..09fc501 100644 (file)
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -13,6 +13,17 @@ in the setup screen at F2:
   - Remote Terminal Type: VT100/VT220
   - Redirection After Boot: Disabled
 
   - Remote Terminal Type: VT100/VT220
   - Redirection After Boot: Disabled
 

+New Supermicros:
+- Advanced -> "Wait for 'F1' If Error" -> Disabled
+- Advanced -> Power Button Function -> 4 Seconds Override
+- Advanced -> PCIe/PnP -> Load Onboard LAN N Option Rom -> Disabled
+- Advanced -> Serial Port -> SOL -> Redirection After BIOS Post -> BootLoader
+- Advanced -> Serial Port -> COM -> Console Redirection -> Enabled
+- Advanced -> Serial Port -> COM -> Redirection After BIOS Post -> BootLoader
+Advanced -> PCIe -> Disable all OPROMS
+- Boot order: USB Hard Disk, Removable, Hard Disk, UEFI Shell
+
+

 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN
 - IP is (main IP) =~ s/18.181.0/10.5.128/
 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN
 - IP is (main IP) =~ s/18.181.0/10.5.128/

@@ -54,6 +65,9 @@ Currently allocated backend IPs:
 10.5.128.226 g-d IPMI (currently unplugged)
 10.5.128.227 b-f IPMI
 10.5.128.228 m-a IPMI (not configured)
 10.5.128.226 g-d IPMI (currently unplugged)
 10.5.128.227 b-f IPMI
 10.5.128.228 m-a IPMI (not configured)

+18.4.58.231 new c-s IPMI
+18.4.58.232 new a-s IPMI
+

 
 10.6.128.16 c-s
 10.6.128.17 a-s
 
 10.6.128.16 c-s
 10.6.128.17 a-s