Updated host notes

[invirt/doc/xvm.git] / xvm-host-setup-notes

diff --git a/xvm-host-setup-notes b/xvm-host-setup-notes
index 09fc501..3ba8a4d 100644 (file)
--- a/xvm-host-setup-notes
+++ b/xvm-host-setup-notes
@@ -20,9 +20,17 @@ New Supermicros:
 - Advanced -> Serial Port -> SOL -> Redirection After BIOS Post -> BootLoader
 - Advanced -> Serial Port -> COM -> Console Redirection -> Enabled
 - Advanced -> Serial Port -> COM -> Redirection After BIOS Post -> BootLoader
 - Advanced -> Serial Port -> SOL -> Redirection After BIOS Post -> BootLoader
 - Advanced -> Serial Port -> COM -> Console Redirection -> Enabled
 - Advanced -> Serial Port -> COM -> Redirection After BIOS Post -> BootLoader

-Advanced -> PCIe -> Disable all OPROMS
+- Advanced -> PCIe -> Disable all OPROMS
+- IPMI -> BMC Network Configuration

 - Boot order: USB Hard Disk, Removable, Hard Disk, UEFI Shell
 
 - Boot order: USB Hard Disk, Removable, Hard Disk, UEFI Shell
 

+New debian installer:
+ - 1000M for /boot in raid1 of sda1, sdb1
+ - rest for LVM in raid1 of sda2, sdb2
+  - 100G /
+  - 64G swap
+ - install a vanilla kernel, not xen;
+   will install xen hypervisor from backports in our later custom install

 
 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN
 
 in the setup screen for remote management, at Ctrl-E:
 - Turn on IPMI over LAN

@@ -67,6 +75,8 @@ Currently allocated backend IPs:
 10.5.128.228 m-a IPMI (not configured)
 18.4.58.231 new c-s IPMI
 18.4.58.232 new a-s IPMI
 10.5.128.228 m-a IPMI (not configured)
 18.4.58.231 new c-s IPMI
 18.4.58.232 new a-s IPMI

+18.4.58.233 new s-m IPMI
+18.4.58.234 new a-m IPMI

 
 
 10.6.128.16 c-s
 
 
 10.6.128.16 c-s