- Advanced -> Serial Port -> SOL -> Redirection After BIOS Post -> BootLoader
- Advanced -> Serial Port -> COM -> Console Redirection -> Enabled
- Advanced -> Serial Port -> COM -> Redirection After BIOS Post -> BootLoader
-Advanced -> PCIe -> Disable all OPROMS
+- Advanced -> PCIe -> Disable all OPROMS
+- IPMI -> BMC Network Configuration
- Boot order: USB Hard Disk, Removable, Hard Disk, UEFI Shell
+New debian installer:
+ - 1000M for /boot in raid1 of sda1, sdb1
+ - rest for LVM in raid1 of sda2, sdb2
+ - 100G /
+ - 64G swap
+ - install a vanilla kernel, not xen;
+ will install xen hypervisor from backports in our later custom install
in the setup screen for remote management, at Ctrl-E:
- Turn on IPMI over LAN
10.5.128.228 m-a IPMI (not configured)
18.4.58.231 new c-s IPMI
18.4.58.232 new a-s IPMI
+18.4.58.233 new s-m IPMI
+18.4.58.234 new a-m IPMI
10.6.128.16 c-s