- CPU -> Virtualization Technology: on
- Boot Sequence: disable NIC
- Integrated Devices -> Embedded Gb NIC: turn off PXE
+- Serial Communication:
+ - Serial Communication: On with Console Redirection via COM2
+ - External Serial Connector: COM1
+ - Failsafe Baud Rate: 57600
+ - Remote Terminal Type: VT100/VT220
+ - Redirection After Boot: Disabled
in the setup screen for remote management, at Ctrl-E:
+- Turn on IPMI over LAN
- IP is (main IP) =~ s/18.181.0/10.5.128/
e.g. 10.5.128.221 for citadel-station == 18.181.0.221
- netmask is 255.255.0.0
+- Set the password to the XVM root
-These settings are reflected in the basic screen of xvm-host-2 and the
-remote-management screen of xvm-host-1. At time of writing, the basic
-settings on xvm-host-1 may differ, and the remote-management settings
-on xvm-host-2 are disabled. xvm-host-3 has IPMI-over-LAN enabled in
-the Ctrl-E screen. xvm-host-4 remains unconfigured.
+All of these settings are reflected on all 4 servers in the production
+cluster.
In the debian installer: