--- /dev/null
+<% from invirt.config import structs as cfg %>\
+# PostgreSQL Client Authentication Configuration File
+# ===================================================
+#
+# Refer to the PostgreSQL Administrator's Guide, chapter "Client
+# Authentication" for a complete description. A short synopsis
+# follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which PostgreSQL user names they can use, which
+# databases they can access. Records take one of these forms:
+#
+# local DATABASE USER METHOD [OPTION]
+# host DATABASE USER CIDR-ADDRESS METHOD [OPTION]
+# hostssl DATABASE USER CIDR-ADDRESS METHOD [OPTION]
+# hostnossl DATABASE USER CIDR-ADDRESS METHOD [OPTION]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain socket,
+# "host" is either a plain or SSL-encrypted TCP/IP socket, "hostssl" is an
+# SSL-encrypted TCP/IP socket, and "hostnossl" is a plain TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", "samerole", a database name, or
+# a comma-separated list thereof.
+#
+# USER can be "all", a user name, a group name prefixed with "+", or
+# a comma-separated list thereof. In both the DATABASE and USER fields
+# you can also write a file name prefixed with "@" to include names from
+# a separate file.
+#
+# CIDR-ADDRESS specifies the set of hosts the record matches.
+# It is made up of an IP address and a CIDR mask that is an integer
+# (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that specifies
+# the number of significant bits in the mask. Alternatively, you can write
+# an IP address and netmask in separate columns to specify the set of hosts.
+#
+# METHOD can be "trust", "reject", "md5", "crypt", "password",
+# "krb5", "ident", or "pam". Note that "password" sends passwords
+# in clear text; "md5" is preferred since it sends encrypted passwords.
+#
+# OPTION is the ident map or the name of the PAM service, depending on METHOD.
+#
+# Database and user names containing spaces, commas, quotes and other special
+# characters must be quoted. Quoting one of the keywords "all", "sameuser" or
+# "samerole" makes the name lose its special character, and just match a
+# database or username with that name.
+#
+# This file is read on server startup and when the postmaster receives
+# a SIGHUP signal. If you edit the file on a running system, you have
+# to SIGHUP the postmaster for the changes to take effect. You can use
+# "pg_ctl reload" to do that.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records. In that case you will also need to make PostgreSQL listen
+# on a non-local interface via the listen_addresses configuration parameter,
+# or via the -i or -h command line switches.
+#
+
+
+
+
+# DO NOT DISABLE!
+# If you change this first entry you will need to make sure that the
+# database
+# super user can access the database using some other method.
+# Noninteractive
+# access to all databases is required during automatic maintenance
+# (autovacuum, daily cronjob, replication, and similar tasks).
+#
+# Database administrative login by UNIX sockets
+local all postgres ident sameuser
+
+# TYPE DATABASE USER CIDR-ADDRESS METHOD
+
+# "local" is for Unix domain socket connections only
+local all all ident sameuser
+# IPv4 local connections:
+host all all 127.0.0.1/32 md5
+# IPv6 local connections:
+host all all ::1/128 md5
+host ${cfg.db.dbname} ${cfg.db.user} ${cfg.db.ip}/32 trust
+% for h in cfg.hosts:
+host ${cfg.db.dbname} ${cfg.db.user} ${h.ip}/32 trust
+% endfor
--- /dev/null
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# (The '=' is optional.) White space may be used. Comments are introduced
+# with '#' anywhere on a line. The complete list of option names and
+# allowed values can be found in the PostgreSQL documentation. The
+# commented-out settings shown in this file represent the default values.
+#
+# Please note that re-commenting a setting is NOT sufficient to revert it
+# to the default value, unless you restart the postmaster.
+#
+# Any option can also be given as a command line switch to the
+# postmaster, e.g. 'postmaster -c log_connections=on'. Some options
+# can be changed at run-time with the 'SET' SQL command.
+#
+# This file is read on postmaster startup and when the postmaster
+# receives a SIGHUP. If you edit the file on a running system, you have
+# to SIGHUP the postmaster for the changes to take effect, or use
+# "pg_ctl reload". Some settings, such as listen_addresses, require
+# a postmaster shutdown and restart to take effect.
+
+
+#---------------------------------------------------------------------------
+# FILE LOCATIONS
+#---------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command line
+# switch or PGDATA environment variable, represented here as ConfigDir.
+
+#data_directory = 'ConfigDir' # use data in another directory
+hba_file = '/etc/postgresql/8.1/main/pg_hba.conf' # host-based authentication file
+ident_file = '/etc/postgresql/8.1/main/pg_ident.conf' # IDENT configuration file
+
+# If external_pid_file is not explicitly set, no extra pid file is written.
+external_pid_file = '/var/run/postgresql/8.1-main.pid' # write an extra pid file
+
+
+#---------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#---------------------------------------------------------------------------
+
+# - Connection Settings -
+
+listen_addresses = '*' # what IP address(es) to listen on;
+ # comma-separated list of addresses;
+ # defaults to 'localhost', '*' = all
+port = 5432
+max_connections = 100
+# note: increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction). You
+# might also need to raise shared_buffers to support more connections.
+#superuser_reserved_connections = 2
+unix_socket_directory = '/var/run/postgresql'
+#unix_socket_group = ''
+#unix_socket_permissions = 0777 # octal
+#bonjour_name = '' # defaults to the computer name
+
+# - Security & Authentication -
+
+#authentication_timeout = 60 # 1-600, in seconds
+ssl = true
+#password_encryption = on
+#db_user_namespace = off
+
+# Kerberos
+#krb_server_keyfile = ''
+#krb_srvname = 'postgres'
+#krb_server_hostname = '' # empty string matches any keytab entry
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see 'man 7 tcp' for details
+
+#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_count = 0 # TCP_KEEPCNT;
+ # 0 selects the system default
+
+
+#---------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#---------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 1000 # min 16 or max_connections*2, 8KB each
+#temp_buffers = 1000 # min 100, 8KB each
+#max_prepared_transactions = 5 # can be 0 or more
+# note: increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+#work_mem = 1024 # min 64, size in KB
+#maintenance_work_mem = 16384 # min 1024, size in KB
+#max_stack_depth = 2048 # min 100, size in KB
+
+# - Free Space Map -
+
+#max_fsm_pages = 20000 # min max_fsm_relations*16, 6 bytes each
+#max_fsm_relations = 1000 # min 100, ~70 bytes each
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000 # min 25
+#preload_libraries = ''
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0 # 0-1000 milliseconds
+#vacuum_cost_page_hit = 1 # 0-10000 credits
+#vacuum_cost_page_miss = 10 # 0-10000 credits
+#vacuum_cost_page_dirty = 20 # 0-10000 credits
+#vacuum_cost_limit = 200 # 0-10000 credits
+
+# - Background writer -
+
+#bgwriter_delay = 200 # 10-10000 milliseconds between rounds
+#bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round
+#bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round
+#bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round
+#bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round
+
+
+#---------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#---------------------------------------------------------------------------
+
+# - Settings -
+
+#fsync = on # turns forced synchronization on or off
+#wal_sync_method = fsync # the default is the first option
+ # supported by the operating system:
+ # open_datasync
+ # fdatasync
+ # fsync
+ # fsync_writethrough
+ # open_sync
+#full_page_writes = on # recover from partial page writes
+#wal_buffers = 8 # min 4, 8KB each
+#commit_delay = 0 # range 0-100000, in microseconds
+#commit_siblings = 5 # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 300 # range 30-3600, in seconds
+#checkpoint_warning = 30 # in seconds, 0 is off
+
+# - Archiving -
+
+#archive_command = '' # command to use to archive a logfile
+ # segment
+
+
+#---------------------------------------------------------------------------
+# QUERY TUNING
+#---------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#effective_cache_size = 1000 # typically 8KB each
+#random_page_cost = 4 # units are one sequential page fetch
+ # cost
+#cpu_tuple_cost = 0.01 # (same)
+#cpu_index_tuple_cost = 0.001 # (same)
+#cpu_operator_cost = 0.0025 # (same)
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5 # range 1-10
+#geqo_pool_size = 0 # selects default based on effort
+#geqo_generations = 0 # selects default based on effort
+#geqo_selection_bias = 2.0 # range 1.5-2.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 10 # range 1-1000
+#constraint_exclusion = off
+#from_collapse_limit = 8
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
+ # JOINs
+
+
+#---------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#---------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr' # Valid values are combinations of
+ # stderr, syslog and eventlog,
+ # depending on platform.
+
+# This is used when logging to stderr:
+#redirect_stderr = off # Enable capturing of stderr into log
+ # files
+
+# These are only used if redirect_stderr is on:
+#log_directory = 'pg_log' # Directory where log files are written
+ # Can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log file name pattern.
+ # Can include strftime() escapes
+#log_truncate_on_rotation = off # If on, any existing log file of the same
+ # name as the new log file will be
+ # truncated rather than appended to. But
+ # such truncation only occurs on
+ # time-driven rotation, not on restarts
+ # or size-driven rotation. Default is
+ # off, meaning append to existing files
+ # in all cases.
+#log_rotation_age = 1440 # Automatic rotation of logfiles will
+ # happen after so many minutes. 0 to
+ # disable.
+#log_rotation_size = 10240 # Automatic rotation of logfiles will
+ # happen after so many kilobytes of log
+ # output. 0 to disable.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+
+# - When to Log -
+
+#client_min_messages = notice # Values, in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # log
+ # notice
+ # warning
+ # error
+
+#log_min_messages = notice # Values, in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic
+
+#log_error_verbosity = default # terse, default, or verbose messages
+
+#log_min_error_statement = panic # Values in order of increasing severity:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # panic(off)
+
+#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+ # and their durations, in milliseconds.
+
+#silent_mode = off # DO NOT USE without syslog or
+ # redirect_stderr
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+log_line_prefix = '%t ' # Special values:
+ # %u = user name
+ # %d = database name
+ # %r = remote host and port
+ # %h = remote host
+ # %p = PID
+ # %t = timestamp (no milliseconds)
+ # %m = timestamp with milliseconds
+ # %i = command tag
+ # %c = session id
+ # %l = session line number
+ # %s = session start timestamp
+ # %x = transaction id
+ # %q = stop here in non-session
+ # processes
+ # %% = '%'
+ # e.g. '<%u%%%d> '
+#log_statement = 'none' # none, mod, ddl, all
+#log_hostname = off
+
+
+#---------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#---------------------------------------------------------------------------
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+# - Query/Index Statistics Collector -
+
+#stats_start_collector = on
+#stats_command_string = off
+#stats_block_level = off
+stats_row_level = on
+#stats_reset_on_server_start = off
+
+
+#---------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#---------------------------------------------------------------------------
+
+autovacuum = on # enable autovacuum subprocess?
+#autovacuum_naptime = 60 # time between autovacuum runs, in secs
+#autovacuum_vacuum_threshold = 1000 # min # of tuple updates before
+ # vacuum
+#autovacuum_analyze_threshold = 500 # min # of tuple updates before
+ # analyze
+#autovacuum_vacuum_scale_factor = 0.4 # fraction of rel size before
+ # vacuum
+#autovacuum_analyze_scale_factor = 0.2 # fraction of rel size before
+ # analyze
+#autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for
+ # autovac, -1 means use
+ # vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+ # autovac, -1 means use
+ # vacuum_cost_limit
+
+
+#---------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#---------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '$user,public' # schema names
+#default_tablespace = '' # a tablespace name, '' uses
+ # the default
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#statement_timeout = 0 # 0 is disabled, in milliseconds
+
+# - Locale and Formatting -
+
+#datestyle = 'iso, mdy'
+#timezone = unknown # actually, defaults to TZ
+ # environment setting
+#australian_timezones = off
+#extra_float_digits = 0 # min -15, max 2
+#client_encoding = sql_ascii # actually, defaults to database
+ # encoding
+
+# These settings are initialized by initdb -- they might be changed
+lc_messages = 'C' # locale for system error message
+ # strings
+lc_monetary = 'C' # locale for monetary formatting
+lc_numeric = 'C' # locale for number formatting
+lc_time = 'C' # locale for time formatting
+
+# - Other Defaults -
+
+#explain_pretty_print = on
+#dynamic_library_path = '$libdir'
+
+
+#---------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#---------------------------------------------------------------------------
+
+#deadlock_timeout = 1000 # in milliseconds
+#max_locks_per_transaction = 64 # min 10
+# note: each lock table slot uses ~220 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+
+
+#---------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#---------------------------------------------------------------------------
+
+# - Previous Postgres Versions -
+
+#add_missing_from = off
+#backslash_quote = safe_encoding # on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = off
+#regex_flavor = advanced # advanced, extended, or basic
+#sql_inheritance = on
+
+# - Other Platforms & Clients -
+
+#transform_null_equals = off
+
+
+#---------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#---------------------------------------------------------------------------
+
+#custom_variable_classes = '' # list of custom variable class names
projects / invirt/packages/invirt-database.git / commitdiff
